Bug#337555: Package: installation-reports
Package: installation-reports
Debian-installer-version: http://amd64.debian.net/debian-installer/daily/netboot/mini.iso 03.11.05
uname -a: Linux mobil 2.6.12-1-amd64-generic #1 Wed Sep 28 02:05:15 CEST 2005 x86_64 GNU/Linux
Date: 03.11.2005 18:00 CET
Method: Network installation based on mini.iso image on CDROM
Machine: HP Compaq nx6125 Business Notebook-PC
Processor: AMD Turion64 ML-34 1.8GHz
Memory: 1GB
Root Device: IDE /dev/hda
Root Size/partition table:
fdisk -l /dev/hda:
Disk /dev/hda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 3824 30716248+ 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/hda2 3825 3840 128520 83 Linux
/dev/hda3 3841 4083 1951897+ 82 Linux swap / Solaris
less /etc/fstab:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda4 / ext3 defaults,errors=remount-ro 0 1
/dev/hda2 /boot ext3 defaults 0 2
/dev/hda3 none swap sw 0 0
/dev/hdc /media/cdrom0 udf,iso9660 ro,user,noauto 0 0
Output of lspci and lspci -n:
lspci:
0000:00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
0000:00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f
0000:00:04.0 PCI bridge: ATI Technologies Inc: Unknown device 5a36
0000:00:05.0 PCI bridge: ATI Technologies Inc: Unknown device 5a37
0000:00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
0000:00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
0000:00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
0000:00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
0000:00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI
0000:00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
0000:00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
0000:00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
0000:00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 02)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
0000:01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)
0000:02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
0000:02:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
0000:02:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
0000:02:04.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Ho
st Controller
lspci -n:
0000:00:00.0 0600: 1002:5950 (rev 01)
0000:00:01.0 0604: 1002:5a3f
0000:00:04.0 0604: 1002:5a36
0000:00:05.0 0604: 1002:5a37
0000:00:13.0 0c03: 1002:4374
0000:00:13.1 0c03: 1002:4375
0000:00:13.2 0c03: 1002:4373
0000:00:14.0 0c05: 1002:4372 (rev 11)
0000:00:14.1 0101: 1002:4376
0000:00:14.3 0601: 1002:4377
0000:00:14.4 0604: 1002:4371
0000:00:14.5 0401: 1002:4370 (rev 02)
0000:00:14.6 0703: 1002:4378 (rev 02)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:05.0 0300: 1002:5955
0000:02:01.0 0200: 14e4:169c (rev 03)
0000:02:02.0 0280: 14e4:4318 (rev 02)
0000:02:04.0 0607: 104c:8031
0000:02:04.2 0c00: 104c:8032
0000:02:04.3 0180: 104c:8033
0000:02:04.4 0805: 104c:8034
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Select Mirror: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Boot-Option:
linux vga=0x343
Tasksel:
[*] Laptop
[*] Standard System
Error messages in /var/log/boot:
...
All modules loaded.
Setting the System Clock using the Hardware Clock as referencemodprobe: WARNING: Error inserting genrtc (/lib/modules/2.6.12-1-amd64-generic/kernel/drivers/char/genrtc.ko): Device or resource busy
...
Starting hotplug subsystem:
pci
modprobe: FATAL: Error inserting shpchp (/lib/modules/2.6.12-1-amd64-generic/kernel/drivers/pci/hotplug/shpchp.ko): Operation not permitted
shpchp: can't be loaded
missing kernel or user mode driver shpchp
...
done.
^[[33m*^[[39;49m /etc/network/options is deprecated.
...
Starting portmap daemon: portmap.
^[]RSetting up general console font... Setting up per-VC ACM's: /dev/tty1 (iso15), /dev/tty2 (iso15), /dev/tty3 (iso15), /dev/tty4 (iso15), /dev/tty5 (iso15), /dev/tty6 (iso15), done.
^[[9;30]^[[14;30]Setting the System Clock using the Hardware Clock as reference
...
What to do?
Tasksel again:
[*] Desktop-Environment doesn't work because of unmet dependencies for gnome-desktop-environment, kde and gnome.
What could i do to install the desktop environment?
I hope this helps for further development. If you need further information, feel free to ask.
Regards
Martin Krieger
Reply to: