Bug#336835: Package: installation-reports
Package: installation-reports
Debian-installer-version:
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/current/debian-testing-i386-netinst.iso
on 2005-11-01 at 15:00
uname -a: linux debianbox 2.6.12-1-386 #1 Tue Sep 27 12:41:08 JST 2005
Date: 2005-11-01 15:10
Method: Booted off the above mentioned ISO which is a netinst
Machine: Dell PowerEdge 1850
Processor: 2xIntel Xeon 3.20GHz 1MB L2 Cache
Memory: 4096Mb ECC DDR
Root Device: Ultra320 SCSI Integrated PERC4e/Si 73Gb
Root Size/partition table:
Device Boot Start End Blocks Id System
/dev/sda1 1 8 64228+ 83 Linux
/dev/sda2 9 132 996030 83 Linux
/dev/sda3 133 375 1951897+ 82 Linux swap / Solaris
/dev/sda4 376 8908 68541322+ 5 Extended
/dev/sda5 376 861 3903763+ 83 Linux
/dev/sda6 862 1347 3903763+ 83 Linux
/dev/sda7 1348 2076 5855661 83 Linux
/dev/sda8 2077 2805 5855661 83 Linux
/dev/sda9 2806 8908 49022316 83 Linux
/dev/sda2 on / type ext3 (rw,errors=remount-ro)
/dev/sda1 on /boot type ext3 (rw)
/dev/sda9 on /home type ext3 (rw)
/dev/sda5 on /tmp type ext3 (rw)
/dev/sda6 on /usr type ext3 (rw)
/dev/sda7 on /usr/local type ext3 (rw)
/dev/sda8 on /var type ext3 (rw)
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 09)
0000:00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express
Port A0 (rev 09)
0000:00:04.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express
Port B0 (rev 09)
0000:00:05.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express
Port B1 (rev 09)
0000:00:06.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express
Port C0 (rev 09)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #3 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge
(rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra
ATA 100 Storage Controller (rev 02)
0000:01:00.0 PCI bridge: Intel Corp. 80332 [Dobson] I/O processor (rev 06)
0000:01:00.2 PCI bridge: Intel Corp. 80332 [Dobson] I/O processor (rev 06)
0000:02:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID
controller 4 (rev 06)
0000:05:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09)
0000:05:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09)
0000:06:07.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit
Ethernet Controller (rev 05)
0000:07:08.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit
Ethernet Controller (rev 05)
0000:09:0d.0 VGA compatible controller: ATI Technologies Inc Radeon
RV100 QY [Radeon 7000/VE]
0000:00:00.0 0600: 8086:3590 (rev 09)
0000:00:02.0 0604: 8086:3595 (rev 09)
0000:00:04.0 0604: 8086:3597 (rev 09)
0000:00:05.0 0604: 8086:3598 (rev 09)
0000:00:06.0 0604: 8086:3599 (rev 09)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
0000:00:1d.7 0c03: 8086:24dd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.1 0101: 8086:24db (rev 02)
0000:01:00.0 0604: 8086:0330 (rev 06)
0000:01:00.2 0604: 8086:0332 (rev 06)
0000:02:0e.0 0104: 1028:0013 (rev 06)
0000:05:00.0 0604: 8086:0329 (rev 09)
0000:05:00.2 0604: 8086:032a (rev 09)
0000:06:07.0 0200: 8086:1076 (rev 05)
0000:07:08.0 0200: 8086:1076 (rev 05)
0000:09:0d.0 0300: 1002:5159
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O/E]
Comments/Problems:
Trying to detect hard drives failed because the stock kernel on the
installer does not contain megaraid_mm.ko or megaraid_mbox.ko. Not
knowing exactly what to do I unpacked a linux-image-2.6.12-1-386 on
another box, grabbed the two modules, put 'em on a floppy, insmod'd 'em
and copied to the correct place in the /lib of the installer. I then
continued on and checked the installed initrd to make sure they were there.
On reboot, although we managed to get the megaraid working, free reports
only 885Mb of RAM (We have 4Gb.) I'm not sure whether a
compiling/installing a new kernel will fix this, any ideas?
Thanks,
andy
--
Andrew Thornton
andrew@caret.cam.ac.uk / andrew@cbcl.co.uk
Reply to: