Please help me.
Dear Debian Boot Team
I have a problem with Installation of Woody. This is the first time I try to
use Linux, and I have been a windows user.
The spec of my machine is as follows:
Dell Powr Edge SC430
HT Intel PentiumR 4 Processer
521(2.80GHz、1MB L2 cash、EM64T、800MHz FSB)
ECC DDR2-533 SDRAM(Dualchannel)no buffer
DIMMsocket×4（max4GB）
Chipset E7230
HDD 80GB (7,200rmp)SATA max500GB (2 x 250GB in the case of SATA)
SCSI single Drive:PowerVault 100T DAT72(including)(36GB/72GB)
Floppy Drivex 1
5.25inch xCD-ROM
USB Mouse
USB Keybord
I/OSlot
PCI Expressx8(1)
PCI Expressx4(1)
PCI Expressx1(1)
PCI (32bit/33MHz)x2
I/O port
Sirial x 1 、USB 2.0 x 4 、Monior x 1、RJ45 x 1
Drive Controller
SATA Controller(OnBoard)x4
Onboard Broadcom 5751Gbit Ethernet・Controllerｘ1
Onboard XGI XG20 GraphicController(16MB)
After boot(default), I can see the message of
" NET4 : Linux TCP/IP 1.0 for NET4.0
IP Protocols : ICMP, UDP, TCP
TCP : Hash tables configured (ehash 524288 bhash 65536)
Starting kswapd v 1.5
vga16fb : initializing
vga16fb : mapped to 0xc00a0000
Console : switching to colour frame buffer device 80x30
fb0 : VGA16 VGA frame buffer device
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03fb (irq = 4) is a 16550A
pty : 256 Unix98 ptys configured
RAM disk driver initialized: 16 RAM disks of 16384K size
loop : registerd device at major 7
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=27df
PCI_IDE: not 100% native mode: will probe irqs later
ide0: MB=DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: MB=DMA at 0xffa8-0xffaf, BIOS settings: hda:pio, hdb:pio
PCI_IDE: unknown IDE controller on PCI bus 00 device fa, VID=8086, DID=27c0
PCI_IDE: not 100% native mode: will probe irqs later
ide2: MB=DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide3: MB=DMA at 0xffa8-0xffaf, BIOS settings: hda:pio, hdb:pio
hda: LITE-ON CD-ROM LTN=489S, ATAPI CDROM drive
hde: WDC WD800JD-75MSA1, ATA DISK drive
ide0 at 0x1f0-ox1f7,0x3fb on irq14"
, and the installation is stopped( The machine is quiet.).
I used the 3.0の(Woody)CDR (debian-30r6-i386-binary-1.iso file,
http://www.orca.med.or.jp/pub/cdimage/debian-cd/)
Could you pleas tell me the solution, point out what device will be to
blame, tell me what problem will expect in the case of my machine in future.
Yours, sincerely
Minoru Furuya(Japan)
Reply to: