[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#320784: installation-reports: missing script & packages from CD



Package: installation-reports
Severity: grave
Justification: renders package unusable

Debian-installer-version: 
http://cdimage.debian.org/pub/cdimage-testing/etch_d-i/i386/20050709/debian-testing-i386-netinst.iso
uname -a:Linux lightspeed.dnsalias.net 2.6.8-2-386 #1 Thu May 19 
17:40:50 JST 2005
Date: 2005 Aug 1st, time: 11:34
Method: install from netinst CD, and then download the rest of the 
packages through PPPoE
Machine: motherboard: MS8188E, graphics: on-board S3 UniChrome
Processor: Athlon XP Thoroughbred 2100+
Memory: 512 Mb DDR PC3200
Root device: IDE, /dev/hda9
Root size/partition table:
Disk geometry for /dev/hda: 0.000-39205.687 megabytes
Disk label type: msdos
Minor    Start       End     Type      Filesystem  Flags
1          0.031   7632.443  primary   ntfs        boot
2       7632.444  39205.502  extended              lba
5       7632.475  15131.535  logical   reiserfs
6      15131.566  15257.043  logical   linux-swap
7      15257.074  31000.429  logical   fat32       lba
8      31000.460  31486.772  logical   linux-swap           <= swap
9      31486.803  39205.502  logical   reiserfs             <= /

Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400] Chipset 
Host Bridge
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. 
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 
[Rhine-II] (rev 74)
0000:01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 
[S3 UniChrome] Integrated Video (rev 01)

0000:00:00.0 0600: 1106:3205
0000:00:01.0 0604: 1106:b198
0000:00:10.0 0c03: 1106:3038 (rev 80)
0000:00:10.1 0c03: 1106:3038 (rev 80)
0000:00:10.2 0c03: 1106:3038 (rev 80)
0000:00:10.3 0c03: 1106:3104 (rev 82)
0000:00:11.0 0601: 1106:3177
0000:00:11.1 0101: 1106:0571 (rev 06)
0000:00:11.5 0401: 1106:3059 (rev 50)
0000:00:12.0 0200: 1106:3065 (rev 74)
0000:01:00.0 0300: 1106:7205 (rev 01)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [0]
Configure network HW:   [0]
Config network:         [E]
Detect CD:              [0]
Load installer modules: [0]
Detect hard drives:     [0]
Partition hard drives:  [0]
Create file systems:    [0]
Mount partitions:       [0]
Install base system:    [E]
Install boot loader:    [0]
Reboot:                 [0]

Comments/Problems:

I. The network couldn't be configured because I use PPPoE, i managed to 
configure it after the reboot (this is a known issue, I've read on the 
webpage).
II. The base system didn't install, because:
  1. Deboostrap error: no such script /usr/lib/debootstrap/scripts/etch
  solution: I copied the /usr/lib/debootstrap/scripts/sid to etch
  2. Couldn't download: 
at, exim4, ipchains, mailx, exim4-config, exim4-base, exim4-daemon-light
  note: the packages aren't on the netinst CD!
  solution: I removed the packages from the install script
  3. Couldn't meet dependencies of initrd-tools:
  cramfsprogs, dash missing from the install script
  solution: I added those packages to the install script
  4. Couldn't meet dependencies of whiptail and other packages that 
depend on libslang2
  solution: I added libslang2 to the install script

III. Apt-setup should ask if I want to add more sources when adding an 
http source, but instead it just went to the next step(choosing packages 
to install)
 solution: I added the local mirrors, and cdroms first,(in this case 
apt-setup asked me if I want more sources added)  and then the 
http source

Note: when I downloaded the netinst CD image yesterday it was the 
newest, today I see that a new one has been added, I haven't tested that 
one. You can see the URL of the CD I tested on top

Thanks you,
Edwin

-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.8-2-k7
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)



Reply to: