Bug#311193: Install Report for PowerBook 3400c
Package: installation-reports
Debian-installer-version: 2005-May-22, Sarge, Weekly Disk1, PowerPC
uname -a: linux pb3400 2.6.8-powerpc #1 Sun Mar 20 14:09:41 CET 2005 ppc
GNU/Linux
Date: 2005-May-28
Method: Weekly Disk1, Copied vmlinux and initrd.gz to MacOS partition
and used BootX to boot to installer.
Machine: Apple PowerBook 3400c
Processor: 180 MHz PPC 603ev
Memory: 48MB
Root Device: /dev/hda8
Root Size/partition table:
/dev/hda
# type name length base
( size ) system
/dev/hda1 Apple_partition_map Apple 63 @ 1
( 31.5k) Partition map
/dev/hda2 Apple_Driver43 Macintosh 54 @ 64
( 27.0k) Driver 4.3
/dev/hda3 Apple_Driver43 Macintosh 74 @ 118
( 37.0k) Driver 4.3
/dev/hda4 Apple_Driver_ATA Macintosh 54 @ 192
( 27.0k) Unknown
/dev/hda5 Apple_Driver_ATA Macintosh 74 @ 246
( 37.0k) Unknown
/dev/hda6 Apple_Patches Patch Partition 512 @ 320
(256.0k) Unknown
/dev/hda7 Apple_HFS untitled 6291456 @ 832
( 3.0G) HFS
/dev/hda8 Apple_Bootstrap untitled 9216797 @ 6292288
( 4.4G) NewWorld bootblock
/dev/hda9 Apple_UNIX_SVR2 swap 500001 @ 15509085
(244.1M) Linux swap
/dev/hda10 Apple_UNIX_SVR2 untitled 9765626 @ 16009086
( 4.7G) Linux native
/dev/hda11 Apple_UNIX_SVR2 untitled 13295368 @ 25774712
( 6.3G) Linux native
Block size=512, Number of Blocks=39070080
DeviceType=0x0, DeviceId=0x0
Drivers-
1: @ 64 for 22, type=0x1
2: @ 118 for 36, type=0xffff
3: @ 192 for 20, type=0x701
4: @ 246 for 33, type=0xf8ff
Output of lspci:
pb3400:~# lspci
0000:00:0b.0 Host bridge: Apple Computer Inc. Bandit PowerPC host bridge
(rev 03)
0000:00:0d.0 Ethernet controller: Digital Equipment Corporation DECchip
21041 [Tulip Pass 3] (rev 21)
0000:00:0e.0 ff00: Apple Computer Inc. O'Hare I/O (rev 01)
0000:00:10.0 ff00: Apple Computer Inc. O'Hare I/O (rev 01)
0000:00:11.0 VGA compatible controller: Chips and Technologies F65550
(rev 45)
0000:00:13.0 CardBus bridge: Texas Instruments PCI1130 (rev 04)
0000:00:13.1 CardBus bridge: Texas Instruments PCI1130 (rev 04)
pb3400:~# lspci -n
0000:00:0b.0 0600: 106b:0001 (rev 03)
0000:00:0d.0 0200: 1011:0014 (rev 21)
0000:00:0e.0 ff00: 106b:0007 (rev 01)
0000:00:10.0 ff00: 106b:0007 (rev 01)
0000:00:11.0 0300: 102c:00e0 (rev 45)
0000:00:13.0 0607: 104c:ac12 (rev 04)
0000:00:13.1 0607: 104c:ac12 (rev 04)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [E]
Reboot: [E]
Comments/Problems:
Input on installer screen was shifted right 1 character. This problem
did not exist when booting with the 2.4.27 kernel and initrd, but the
2.4.27 could not initialize my Cabletron RoamAbout Wireless PCMCIA card
while 2.6.8 did. The install boot loader step failed as it assumed I
was using quik, therefore the reboot failed the first time as it
completed before I had the opportunity to copy the boot files to my
MacOS partition. This was complicated by the fact that the HFS file
system driver appeared to be missing from the installer. Solved by
mounting a CF card with a FAT file system.
Reply to: