Bug#311136: Sony Vaio PCG-VX88 Netinst Installation Report
Package: installation-reports
Debian-installer-version: image: http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc3/sarge-i386-netinst.iso, downloaded: May 19 or 20, 2005
uname -a: Linux act 2.6.8-2-386 #1 Mon Jan 24 03:01:58 EST 2005 i686 GNU/Linux
Date: 2005-05-20 7:00p
Method: network install; booted off netinst CD image RC3; used mirrors.kernel.org; not proxied
Machine: Sony Vaio PCG-VX88
Processor: Intel(R) Pentium(R) III Mobile CPU 850MHz
Memory: 256 MB
Root Device: IDE; /dev/hda6
Root Size/partition table:
act:~# fdisk -l /dev/hda
Disk /dev/hda: 40.0 GB, 40007761920 bytes
255 heads, 63 sectors/track, 4864 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 622 4996183+ 5 Extended
/dev/hda2 623 707 682762+ 83 Linux
/dev/hda3 708 2786 16699567+ 83 Linux
/dev/hda4 2787 4864 16691535 83 Linux
/dev/hda5 1 124 995967 82 Linux swap / Solaris
/dev/hda6 * 125 622 4000153+ 83 Linux
act:~# mount
/dev/hda6 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
/dev/hda2 on /arc/home type ext3 (rw,noexec,nosuid,nodev)
/dev/hda3 on /arc/media type ext3 (rw,noexec,nosuid,nodev)
/dev/hda4 on /arc/src type ext3 (rw,nosuid,nodev)
none on /dev type tmpfs (rw,size=10M,mode=0755)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/scd0 on /media/cdrom0 type iso9660 (ro,noexec,nosuid,nodev,user=matt)
Output of lspci
0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 11)
0000:00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 11)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 03)
0000:00:1f.0 ISA bridge: Intel Corp. 82801BAM ISA Bridge (LPC) (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801BAM IDE U100 (rev 03)
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 03)
0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 03)
0000:00:1f.6 Modem: Intel Corp. Intel 537 [82801BA/BAM AC'97 Modem] (rev 03)
0000:01:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
0000:01:02.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80)
0000:01:05.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
0000:01:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller (rev 03)
and lspci -n:
0000:00:00.0 0600: 8086:1130 (rev 11)
0000:00:02.0 0300: 8086:1132 (rev 11)
0000:00:1e.0 0604: 8086:2448 (rev 03)
0000:00:1f.0 0601: 8086:244c (rev 03)
0000:00:1f.1 0101: 8086:244a (rev 03)
0000:00:1f.2 0c03: 8086:2442 (rev 03)
0000:00:1f.3 0c05: 8086:2443 (rev 03)
0000:00:1f.4 0c03: 8086:2444 (rev 03)
0000:00:1f.5 0401: 8086:2445 (rev 03)
0000:00:1f.6 0703: 8086:2446 (rev 03)
0000:01:00.0 0c00: 104c:8023
0000:01:02.0 0607: 1180:0475 (rev 80)
0000:01:05.0 0607: 104c:ac50 (rev 01)
0000:01:08.0 0200: 8086:2449 (rev 03)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [E]
Configure network HW: [O]
Config network: [O]
Detect CD: [E]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
linux24 hangs on loading sbp2 module.
linux26 detects all hardware with no problems and install goes perfectly.
due to security concerns, i did not like how the inetd and exim daemons were started on reboot.
Reply to: