[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#309952: (no subject)

Package: installation-reports

Debian-installer-version: ?;sorry
uname -a: >linux 2.6.8-1-386 #1
Date: thu nov 11 1004
Method: net-install  boot:mini cd  from:fr,ftp2   noProxied

Machine: >DELL latitude C800
Processor:pIII 1g
Root Device: IDE Name of device>Hitachi 10go
Root Size/partition table: hda1=winMe 6Go hda2=swap-256Mo hda3=3.6Go
      table, with notes on which partitions are mounted
where.>+external Hd on usb2 Maxtor 120Go 7200t

Output of lspci> and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge
and Memory Controller Hub (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 03)
0000:00:1f.0 ISA bridge: Intel Corp. 82801BAM ISA Bridge (LPC) (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801BAM IDE U100 (rev 03)
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage
Mobility M4 AGP
0000:02:03.0 Multimedia audio controller: ESS Technology ES1983S
Maestro-3i PCI Audio Accelerator (rev 10)
0000:02:06.0 Ethernet controller: 3Com Corporation 3c556 Hurricane
CardBus [Cyclone] (rev 10)
0000:02:06.1 Communication controller: 3Com Corporation Mini PCI 56k
Winmodem (rev 10)
0000:02:0f.0 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus
0000:02:0f.1 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus
0000:02:0f.2 FireWire (IEEE 1394): Texas Instruments PCI4451 IEEE-1394
 #lspci -n
0000:00:00.0 0600: 8086:1130 (rev 02)
0000:00:01.0 0604: 8086:1131 (rev 02)
0000:00:1e.0 0604: 8086:2448 (rev 03)
0000:00:1f.0 0601: 8086:244c (rev 03)
0000:00:1f.1 0101: 8086:244a (rev 03)
0000:00:1f.2 0c03: 8086:2442 (rev 03)
0000:01:00.0 0300: 1002:4d46
0000:02:03.0 0401: 125d:1998 (rev 10)
0000:02:06.0 0200: 10b7:6055 (rev 10)
0000:02:06.1 0780: 10b7:1007 (rev 10)
0000:02:0f.0 0607: 104c:ac42
0000:02:0f.1 0607: 104c:ac42
0000:02:0f.2 0c00: 104c:8027

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [E] additional combo/cdburner wasn't work , we
must do it by hand
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [o]
Create file systems:    [o]
Mount partitions:       [o]
Install base system:    [o]
Install boot loader:    [o]
Reboot:                 [o]

thank,for the completed work
<Description of the install, in prose, and any thoughts, comments
      and ideas you had during the initial install.>
the old progress bar with /-|\-| was very usful ; why was it remove (

Reply to: