Bug#269163: marked as done (base install fails on HP ProLiant dl360g3 (using 20040830/netinst))
Your message dated Tue, 10 May 2005 23:31:52 +0200
with message-id <200505102331.53510.aragorn@tiscali.nl>
and subject line Bug#269163: Documentation for management devices
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--------------------------------------
Received: (at submit) by bugs.debian.org; 31 Aug 2004 06:27:15 +0000
>From matt@lackof.org Mon Aug 30 23:27:15 2004
Return-path: <matt@lackof.org>
Received: from colo.lackof.org [198.49.126.79]
by spohr.debian.org with esmtp (Exim 3.35 1 (Debian))
id 1C226s-0003XJ-00; Mon, 30 Aug 2004 23:27:14 -0700
Received: from localhost (localhost [127.0.0.1])
by colo.lackof.org (Postfix) with ESMTP id 0DDA129812D
for <submit@bugs.debian.org>; Tue, 31 Aug 2004 00:26:44 -0600 (MDT)
Received: from colo.lackof.org ([127.0.0.1])
by localhost (colo.lackof.org [127.0.0.1]) (amavisd-new, port 10024)
with ESMTP id 10445-10 for <submit@bugs.debian.org>;
Tue, 31 Aug 2004 00:26:42 -0600 (MDT)
Received: from cyrix.home.bogus (c-24-18-165-146.client.comcast.net [24.18.165.146])
(using TLSv1 with cipher EDH-RSA-DES-CBC3-SHA (168/168 bits))
(Client CN "taggart.lackof.org", Issuer "ca.lackof.org" (verified OK))
by colo.lackof.org (Postfix) with ESMTP id 6B592298121
for <submit@bugs.debian.org>; Tue, 31 Aug 2004 00:26:41 -0600 (MDT)
Received: by cyrix.home.bogus (Postfix, from userid 22223)
id 0A7A11AA70A; Mon, 30 Aug 2004 23:26:40 -0700 (PDT)
Received: from cyrix.home.bogus (localhost [127.0.0.1])
by cyrix.home.bogus (Postfix) with ESMTP id 0356C2FF26
for <submit@bugs.debian.org>; Mon, 30 Aug 2004 23:26:40 -0700 (PDT)
X-Mailer: exmh version 2.5 07/13/2001 (debian 2.5-1) with nmh-1.1
From: Matt Taggart <taggart@debian.org>
To: submit@bugs.debian.org
Subject: base install fails on HP ProLiant dl360g3 (using 20040830/netinst)
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Date: Mon, 30 Aug 2004 23:26:39 -0700
Sender: matt@lackof.org
Message-Id: <20040831062640.0A7A11AA70A@cyrix.home.bogus>
X-Virus-Scanned: by amavisd-new-20030616-p10 (Debian) at lackof.org
Delivered-To: submit@bugs.debian.org
X-Spam-Checker-Version: SpamAssassin 2.60-bugs.debian.org_2004_03_25
(1.212-2003-09-23-exp) on spohr.debian.org
X-Spam-Status: No, hits=-8.0 required=4.0 tests=BAYES_00,HAS_PACKAGE
autolearn=no version=2.60-bugs.debian.org_2004_03_25
X-Spam-Level:
Package: installation-reports
Version: 20040830/netinst
Debian-installer-version: 20040830/netinst
uname -a: Linux (none) 2.4.26-1-386 #2 Sat May 1 16:31:24 EST 2004 i686 unknown
Date: Mon, 30 Aug 2004 20:07:31 -0700
Method: CD, fb console
Machine: HP ProLiant dl360g3
Processor: dual socket Pentium4 3.2GHz
Memory: 2GB (only 1GB shows up with the install kernel?)
Root Device: Compaq SmartArray (cciss driver)
Root Size/partition table: used guided partitioning (see #4)
Output of lspci and lspci -n:
lspci
=======================================================================
0000:00:00.0 Host bridge: ServerWorks CMIC-LE Host Bridge (GC-LE chipset) (rev
3
3)
0000:00:00.1 Host bridge: ServerWorks CMIC-LE Host Bridge (GC-LE chipset)
0000:00:00.2 Host bridge: ServerWorks CMIC-LE Host Bridge (GC-LE chipset)
0000:00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:00:04.0 RAID bus controller: Compaq Computer Corporation Smart Array
5i/532
(rev 01)
0000:00:05.0 System peripheral: Compaq Computer Corporation Integrated Lights
Ou
t Controller (rev 01)
0000:00:05.2 System peripheral: Compaq Computer Corporation Integrated Lights
Ou
t Processor (rev 01)
0000:00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93)
0000:00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93)
0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev
05)
0000:00:0f.3 Host bridge: ServerWorks CSB5 LPC bridge
0000:00:11.0 Host bridge: ServerWorks CIOB-X2 PCI-X I/O Bridge (rev 05)
0000:00:11.2 Host bridge: ServerWorks CIOB-X2 PCI-X I/O Bridge (rev 05)
0000:01:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X
Gigabi
t Ethernet (rev 02)
0000:04:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X
Gigabi
t Ethernet (rev 02)
=======================================================================
lspci -n
=======================================================================
0000:00:00.0 0600: 1166:0014 (rev 33)
0000:00:00.1 0600: 1166:0014
0000:00:00.2 0600: 1166:0014
0000:00:03.0 0300: 1002:4752 (rev 27)
0000:00:04.0 0104: 0e11:b178 (rev 01)
0000:00:05.0 0880: 0e11:b203 (rev 01)
0000:00:05.2 0880: 0e11:b204 (rev 01)
0000:00:0f.0 0601: 1166:0201 (rev 93)
0000:00:0f.1 0101: 1166:0212 (rev 93)
0000:00:0f.2 0c03: 1166:0220 (rev 05)
0000:00:0f.3 0600: 1166:0225
0000:00:11.0 0600: 1166:0101 (rev 05)
0000:00:11.2 0600: 1166:0101 (rev 05)
0000:01:02.0 0200: 14e4:16a7 (rev 02)
0000:04:02.0 0200: 14e4:16a7 (rev 02)
=======================================================================
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O] see #0
Configure network HW: [O] see #1
Config network: [E] see #2
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O] see #3
Partition hard drives: [O] see #4
Create file systems: [O]
Mount partitions: [O]
Install base system: [E] see #5
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
0.) HP ProLiant systems have a remote management device called an "intergrated
Lights Out" ("iLO"). This device intercepts the system's vga text and keyboard
and makes it available via telnet. As long as the system stays in vga text
mode it works great but if you try to use framebuffer it tells you "the system
is in graphics mode". So I am able to start the installer with
"debian-installer/framebuffer=false" and that works fine. The problem is that
the initial bootloader uses a framebuffer splash screen. If you know to hit F1
at that point then you get the text back and boot without framebuffer. Is
there going to be be boot media for i386 that doesn't use the spash screen?
1.) The installer correctly determined that the system has two "BROADCOM
Corporation NetXtreme BCM5703X Gigabit Ethernet", and I can pick one, but...
2.) The installer complains that "eth0 does not seem to be connected to any
sort of network." even though a working network cable is connected (I know
this because it worked with the previous woody install). Looking on the dhcp
server I don't see a dhcp request. I'm given the options "Go Back", "Yes", and
"No". The option "Go Back" doesn't and proceeded to ask me for the hostname.
"Yes" allows me to configure statically and that works fine. If I configure
statically when I get to the hostname/domain config screens the hostname and
domain are pre-inserted so I know the networking is working and it was able to
do a lookup.
3.) This system uses a Compaq SmartArray controller which uses the cciss
driver and weird /dev names. It found the single controller and worked great!
So good job on that. I will try to test with multiple configured arrays and
multiple controllers if I get a chance.
4.) I tried the guided partitioning thing and it looks like "single", "one
partition for /home", and "multiuser" all picked reasonable partition sizes.
If you know what you're doing this works fine but I predict that these screens
will be "scary" to people without Debian experience (like reviewers).
5.) During the base install, the installer complained "debootstrap exited with
an error (return value 1)" /var/log/messages says
=======================================================================
Errors were encountered while processing:
exim4-daemon-light
at
exim4
exim4-config
mailx
exim4-base
=======================================================================
looking in the logs it appears to be exim4-config with the problem,
=======================================================================
Setting up exim4-config (4.34-4) ...
hostname: Host name lookup failure
Adding system-user for exim (v4)
/usr/sbin/exim4: error while loading shared libraries: libgnutls.so.10: cannot
$
Invalid new configfile /var/lib/exim4/config.autogenerated.tmp
not installing /var/lib/exim4/config.autogenerated.tmp to
/var/lib/exim4/config.autogenerated
dpkg: error processing exim4-config (--configure):
subprocess post-installation script returned error exit status 1
=======================================================================
(The "hostname: Host name lookup failure" shows up if I didn't configure the
network by hand when it failed in #2. If I do then it goes away. The rest is
the same regardless)
If I attempt to proceed with installing grub it tries to run the base install
again with the same result.
I used a shell to chroot into /target but the system is not yet self aware
dpkg-wise so I couldn't install anything.
Installation failed :)
--
Matt Taggart
taggart@debian.org
---------------------------------------
Received: (at 269163-done) by bugs.debian.org; 10 May 2005 21:31:33 +0000
>From aragorn@tiscali.nl Tue May 10 14:31:33 2005
Return-path: <aragorn@tiscali.nl>
Received: from smtp-out1.tiscali.nl [195.241.79.176]
by spohr.debian.org with esmtp (Exim 3.35 1 (Debian))
id 1DVcKD-0002Z6-00; Tue, 10 May 2005 14:31:33 -0700
Received: from strider.fjphome.nl (195-240-184-66-mx.xdsl.tiscali.nl [195.240.184.66])
by smtp-out1.tiscali.nl (Postfix) with ESMTP id A5CED8010FFB;
Tue, 10 May 2005 23:31:32 +0200 (CEST)
From: Frans Pop <aragorn@tiscali.nl>
To: Matt Taggart <taggart@debian.org>,
269163-done@bugs.debian.org
Subject: Re: Bug#269163: Documentation for management devices
Date: Tue, 10 May 2005 23:31:52 +0200
User-Agent: KMail/1.7.2
References: <20041123011345.B00991AA937@cyrix.home.bogus>
In-Reply-To: <20041123011345.B00991AA937@cyrix.home.bogus>
MIME-Version: 1.0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Message-Id: <200505102331.53510.aragorn@tiscali.nl>
Delivered-To: 269163-done@bugs.debian.org
X-Spam-Checker-Version: SpamAssassin 2.60-bugs.debian.org_2005_01_02
(1.212-2003-09-23-exp) on spohr.debian.org
X-Spam-Status: No, hits=-5.0 required=4.0 tests=BAYES_00,HAS_BUG_NUMBER,
RCVD_IN_BL_SPAMCOP_NET autolearn=no
version=2.60-bugs.debian.org_2005_01_02
X-Spam-Level:
On Tuesday 23 November 2004 02:13, Matt Taggart wrote:
> As mentioned earlier in this bug, the Compaq integrated Lights Out
> (iLO) management device can't display the initial isolinux vga
> framebuffer splash screen, and you have to blindly hit F1 to get back
> to text. I have also encountered this problem on HP's Integrated Remote
> Assistant (IRA) management device. Rather than get rid of the splash
> screen I think we can just document this problem. I propose the
> following text,
> [...]
I have added a note in the manual based on your text. Thanks very much.
Closing the report as the other issues have already been dealt with.
Cheers,
FJP
Reply to: