Bug#305353: No problems
Package: installation-reports
INSTALL REPORT
Debian-installer-version: rc3 (http://cdimage.debian.org/pub/weekly/i386/sarge-i386-1.iso 2005-03-24)
uname -a:
Installed using "expert26, but did not want to keep this kernel;
2.6 does not support the vt1211 used by lm_sensors. Now using:
Linux nurkka 2.4.27.20050417nurkka #1 Sun Apr 17 21:14:00 EEST 2005 i686 GNU/Linux
Date: 2005-04-15 20:00 UTC+3
Method:
CD1 and network (http://ftp.funet.fi/pub/linux/mirrors/debian/, no proxies)
Machine: Fanless VIA EPIA MII6000
Processor: VIA light server with Samuel 2
Memory: 512 MB
Root Device: IDE /dev/hda5
Root Size/partition table:
Partition Table for /dev/hda
First Last
# Type Sector Sector Offset Length FS Type (ID) Flag Mount point
-- --- --------- ---------- --- ---------- ----------------- ---- -----------
1 Pri 0 7807589 63 7807590 Linux (83) None reserved
2 Pri 7807590 15615179 0 7807590 Linux (83) None reserved
3 Pri 15615180 23422769 0 7807590 Linux (83) None reserved
4 Pri 23422770 106478819 0 83056050 Extended (05) None
5 Log 23422770 27326564 63 3903795 Linux (83) None /
6 Log 27326565 28322594 63 996030 Linux swap (82) None swap
7 Log 28322595 43953839 63 15631245 Linux LVM (8E) None sys_vg
8 Log 43953840 59585084 63 15631245 Linux LVM (8E) None sys_vg
9 Log 59585085 75216329 63 15631245 Linux LVM (8E) None data_vg
10 Log 75216330 90847574 63 15631245 Linux LVM (8E) None data_vg
11 Log 90847575 106478819 63 15631245 Linux LVM (8E) None data_vg
Log 106478820 312576704 0 206097885 Free Space None
Filesystem Size Used Avail Use% Mounted on
/dev/hda5 1.9G 167M 1.7G 9% /
tmpfs 236M 0 236M 0% /dev/shm
/dev/mapper/sys_vg-home_lv 4.0G 77M 3.9G 2% /home
/dev/mapper/sys_vg-opt_lv 3.0G 39M 3.0G 2% /opt
/dev/mapper/sys_vg-usr_lv 5.0G 2.0G 3.1G 40% /usr
/dev/mapper/sys_vg-var_lv 3.0G 331M 2.7G 11% /var
/dev/mapper/data_vg-srv_lv 15G 379M 15G 3% /srv
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
0000:00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
0000:00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
0000:00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
0000:01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics (rev 03)
0000:00:00.0 0600: 1106:3123
0000:00:01.0 0604: 1106:b091
0000:00:0a.0 0607: 1180:0476 (rev 80)
0000:00:0a.1 0607: 1180:0476 (rev 80)
0000:00:0d.0 0c00: 1106:3044 (rev 80)
0000:00:10.0 0c03: 1106:3038 (rev 80)
0000:00:10.1 0c03: 1106:3038 (rev 80)
0000:00:10.2 0c03: 1106:3038 (rev 80)
0000:00:10.3 0c03: 1106:3104 (rev 82)
0000:00:11.0 0601: 1106:3177
0000:00:11.1 0101: 1106:0571 (rev 06)
0000:00:11.5 0401: 1106:3059 (rev 50)
0000:00:12.0 0200: 1106:3065 (rev 74)
0000:01:00.0 0300: 1106:3122 (rev 03)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Everything went fine. Thank you!
Reply to: