Bug#300770: Package: installation-reports
Package: installation-reports
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/daily/i386/ as of Mar. 11th 2005
uname -a: Linux epic 2.6.8-2-386 #1 Mon Jan 24 03:01:58 EST 2005 i686 GNU/Linux
Date: Mar 12th 2005, about 22:00 GMT
Method: CD boot, network install from local mirror
Machine: HP e-pc c10/s10
Processor: Intel PIII 800Mhz
Memory: 128 MB
Root Device: IDE /dev/hda
Root Size/partition table:
Disk /dev/hda: 10.1 GB, 10110320640 bytes
16 heads, 63 sectors/track, 19590 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 993 500440+ 82 Linux swap
/dev/hda2 * 994 10136 4608072 83 Linux
/dev/hda3 10137 19589 4764312 7 HPFS/NTFS
Output of lspci and lspci -n:
epic:~# lspci
0000:00:00.0 Host bridge: Intel Corp. 82810E DC-133 GMCH [Graphics Memory Controller Hub] (rev 03)
0000:00:01.0 VGA compatible controller: Intel Corp. 82810E DC-133 CGC [Chipset Graphics Controller] (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
0000:00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
0000:00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio (rev 02)
0000:01:02.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
epic:~# lspci -n
0000:00:00.0 0600: 8086:7124 (rev 03)
0000:00:01.0 0300: 8086:7125 (rev 03)
0000:00:1e.0 0604: 8086:2418 (rev 02)
0000:00:1f.0 0601: 8086:2410 (rev 02)
0000:00:1f.1 0101: 8086:2411 (rev 02)
0000:00:1f.2 0c03: 8086:2412 (rev 02)
0000:00:1f.3 0c05: 8086:2413 (rev 02)
0000:00:1f.5 0401: 8086:2415 (rev 02)
0000:01:02.0 0200: 10b7:9200 (rev 78)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
First tried rc2 netboot PXE installation and failed because of documented
pre-rc3 problem. Downloaded daily build of d-i ISO imaged, worked great!
Reply to: