[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#300763: Installation report, Dell 2850 with Perc 4e/Di



Package: installation-reports

INSTALL REPORT

Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20050321/sarge-i386-netinst.iso
uname -a: Linux sarge.devnet.lan 2.4.27-2-386 #1 Thu Jan 20 10:55:08 JST 2005 i686 GNU/Linux
Date: Mon Mar 21 10:54:42 CST 2005
Method: Installed from CD using a sarge-i386-netinst ISO, additional 
packages installed via HTTP from mirrors.kernel.org, no proxy.
Machine: Dell PowerEdge 2850 with a Perc 4e/Di, (LSI Logic MegaRAID 513O 254)
Processor: 3.60GHz Xeon
Memory: 1024MB
Root Device: SCSI, /dev/sda
Root Size/partition table:
  Filesystem            Size  Used Avail Use% Mounted on
  /dev/sda1             250M   52M  185M  22% /
  tmpfs                 443M     0  443M   0% /dev/shm
  /dev/sda9              23G   33M   22G   1% /home
  /dev/sda8             361M  8.1M  334M   3% /tmp
  /dev/sda5             4.6G  254M  4.2G   6% /usr
  /dev/sda6             2.8G   77M  2.6G   3% /var

Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 09)
0000:00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port A0 (rev 09)
0000:00:04.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port B0 (rev 09)
0000:00:05.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port B1 (rev 09)
0000:00:06.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port C0 (rev 09)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02)
0000:01:00.0 PCI bridge: Intel Corp. 80332 [Dobson] I/O processor (rev 06)
0000:01:00.2 PCI bridge: Intel Corp. 80332 [Dobson] I/O processor (rev 06)
0000:02:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 4 (rev 06)
0000:05:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09)
0000:05:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09)
0000:06:07.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller (rev 05)
0000:07:08.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller (rev 05)
0000:08:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09)
0000:08:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09)
0000:0b:05.0 ff00: Dell Remote Access Card 4 Daughter Card
0000:0b:05.1 ff00: Dell Remote Access Card 4 Daughter Card Virtual UART
0000:0b:05.2 ff00: Dell Remote Access Card 4 Daughter Card SMIC interface
0000:0b:06.0 IDE interface: Silicon Image, Inc. (formerly CMD Technology Inc) PCI0680 Ultra ATA-133 Host Controller (rev 02)
0000:0b:0d.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]

0000:00:00.0 0600: 8086:3590 (rev 09)
0000:00:02.0 0604: 8086:3595 (rev 09)
0000:00:04.0 0604: 8086:3597 (rev 09)
0000:00:05.0 0604: 8086:3598 (rev 09)
0000:00:06.0 0604: 8086:3599 (rev 09)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.1 0101: 8086:24db (rev 02)
0000:01:00.0 0604: 8086:0330 (rev 06)
0000:01:00.2 0604: 8086:0332 (rev 06)
0000:02:0e.0 0104: 1028:0013 (rev 06)
0000:05:00.0 0604: 8086:0329 (rev 09)
0000:05:00.2 0604: 8086:032a (rev 09)
0000:06:07.0 0200: 8086:1076 (rev 05)
0000:07:08.0 0200: 8086:1076 (rev 05)
0000:08:00.0 0604: 8086:0329 (rev 09)
0000:08:00.2 0604: 8086:032a (rev 09)
0000:0b:05.0 ff00: 1028:0011
0000:0b:05.1 ff00: 1028:0012
0000:0b:05.2 ff00: 1028:0014
0000:0b:06.0 0101: 1095:0680 (rev 02)
0000:0b:0d.0 0300: 1002:5159

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

Everything worked as expect installing with the 2.4.27 kernel, (kernel 2.6.8
does not have support for this RAID adapter). 

-- 
Eric Evans
eevans@sym-link.com

Attachment: signature.asc
Description: Digital signature


Reply to: