Bug#300079: Successful Apple G4 Installation (pre rc3) - netinst image 16 March 05
Package: installation-reports
Debian-installer-version:
sarge-powerpc-netinst.iso 16-Mar-2005 01:02 194M
uname -a: Apollo 2.6.8-powerpc #1 Thu Feb 24 14:15:19 CET 2005 ppc
GNU/Linux
Date: 17 Mar 05
Method: Netinstall after booting from the burnt CD
Proxied=no
Machine: Apple G4 Dual Processor 450MHz
Processor: 7400
Memory: 896 Mb
Root Device: <IDE /dev/hda12
Root Size/partition table:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda12 / ext3 defaults,errors=remount-ro 0
1
/dev/hda13 /var ext3 defaults 0 2
/dev/hda11 none swap sw 0 0
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
Output of lspci:
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP
0000:00:10.0 VGA compatible controller: ATI Technologies Inc Rage 128
PF/PRO AGP 4x TMDS
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI
0001:10:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21154
(rev 05)
0001:11:07.0 ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03)
0001:11:08.0 USB Controller: Apple Computer Inc. KeyLargo USB
0001:11:09.0 USB Controller: Apple Computer Inc. KeyLargo USB
0001:11:0a.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394
Controller (Link)
0002:21:0b.0 Host bridge: Apple Computer Inc. UniNorth Internal PCI
0002:21:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun
GEM) (rev 01)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Flawless install ;)
Thanks all!
Regards
Clive
--
www.clivemenzies.co.uk ...
...strategies for business
Reply to: