[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#297312: successfull installation of RC2 businesscard on HP 712/60



Package: installation-reports

Tags: hppa, d-i

Debian-installer-version: hppa netinst RC2 (businesscard.iso)
uname -a: Linux casandra 2.4.27-32-smp #1 SMP Sun Jan 23 04:23:39 CET 2005
paris
Date: 24-02-2005
Method: Installing from CD in external SCSI-CD-Rom, fetching packages
through proxy.

Machine: HP 712/60
Processor:    
Memory: 128 MB
Root Device: scsi.0.0 (?) 
Root Size/partition table:

Disk /dev/sda: 2147 MB, 2147357696 bytes  
67 heads, 62 sectors/track, 1009 cylinders
Units = cylinders of 4154 * 512 = 2126848 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1          16       33201   f0  Linux/PA-RISC boot
/dev/sda2              17          77      126697   83  Linux   
/dev/sda3              78        1009     1935764    5  Extended
/dev/sda5   *          78         954     1821498   83  Linux
/dev/sda6             955        1009      114204   82  Linux swap

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/sda5       /               ext3    defaults,errors=remount-ro 0       1
/dev/sda2       /boot           ext2    defaults        0       2
/dev/sda6       none            swap    sw              0       0


Output of lspci and lspci -n:

casandra:~# lspci 
pcilib: Cannot open /proc/bus/pci
lspci: Cannot find any working access method.
casandra:~# lspci -n
pcilib: Cannot open /proc/bus/pci
lspci: Cannot find any working access method.


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

The installation took some time, but the system is running fine now.

The boot partition (120 MB) as set up by the automatic partitioner seems a
little bit too large.

minor issue: Why is the system time set to the start of the year 2002, when
RC2 was released in 2004?

None of the other installation media I tried worked. netinst-RC2 had
problems copying large files to the disk. daily builds (netinst and
businesscard) from 22-02-2005 had problems reading the initrd.

-- 
Lassen Sie Ihren Gedanken freien Lauf... z.B. per FreeSMS
GMX bietet bis zu 100 FreeSMS/Monat: http://www.gmx.net/de/go/mail



Reply to: