Bug#260093: marked as done (debian-installer installation-report AlphaStation 500/333)
Your message dated Sun, 27 Feb 2005 17:24:35 -0800
with message-id <20050228012434.GA12162@mauritius.dodds.net>
and subject line Fixed in NMU of partman-auto 41
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--------------------------------------
Received: (at submit) by bugs.debian.org; 18 Jul 2004 12:39:31 +0000
>From ftempel@linuxops.net Sun Jul 18 05:39:31 2004
Return-path: <ftempel@linuxops.net>
Received: from linuxops.net (shanta.linuxops.net) [62.70.14.180] (mail)
by spohr.debian.org with esmtp (Exim 3.35 1 (Debian))
id 1BmAx1-0002wH-00; Sun, 18 Jul 2004 05:39:31 -0700
Received: from amavis by shanta.linuxops.net with scanned-ok (Exim 3.36 #1 (Debian))
id 1BmAwz-0001L1-00
for <submit@bugs.debian.org>; Sun, 18 Jul 2004 14:39:29 +0200
Received: from shanta.linuxops.net ([127.0.0.1])
by localhost (shanta [127.0.0.1]) (amavisd-new, port 10024)
with ESMTP id 03987-02 for <submit@bugs.debian.org>;
Sun, 18 Jul 2004 14:39:27 +0200 (CEST)
Received: from [192.168.1.100] (helo=[192.168.1.100])
by shanta.linuxops.net with asmtp (Exim 3.36 #1 (Debian))
id 1BmAwx-0001JO-00
for <submit@bugs.debian.org>; Sun, 18 Jul 2004 14:39:27 +0200
Subject: debian-installer installation-report AlphaStation 500/333
From: "Ferdinand O. Tempel" <ftempel@linuxops.net>
To: submit@bugs.debian.org
Content-Type: text/plain
Message-Id: <1090154331.1744.59.camel@m00>
Mime-Version: 1.0
X-Mailer: Ximian Evolution 1.4.6
Date: Sun, 18 Jul 2004 14:38:52 +0200
Content-Transfer-Encoding: 7bit
X-Virus-Scanned: by amavisd-new-20030616-p7 (Debian) at linuxops.net
Delivered-To: submit@bugs.debian.org
X-Spam-Checker-Version: SpamAssassin 2.60-bugs.debian.org_2004_03_25
(1.212-2003-09-23-exp) on spohr.debian.org
X-Spam-Status: No, hits=-8.0 required=4.0 tests=BAYES_00,HAS_PACKAGE
autolearn=no version=2.60-bugs.debian.org_2004_03_25
X-Spam-Level:
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 20040716,
http://cdimage.debian.org/pub/cdimage-testing/daily/alpha/20040716/sarge-alpha-businesscard.iso
Linux alphabox 2.4.26-1-generic #2 Sat May 1 16:31:16 EST 2004 alpha
GNU/Linux
Date: Sun Jul 18 13:54:13 CEST 2004
Method: Network install, initiated from a bootable "businesscard" CD.
The CD is booted from the Alpha's SRM console with `boot DSKA600`. I've
tried to install from the regular CD too, but kernel panics are
experienced when the CDRom drive is accessed extensively.
>From /etc/apt/sources.list:
deb ftp://ftp.surfnet.nl/pub/os/Linux/distr/debian/ testing main
Machine: Digital AlphaStation 500/333
Processor: Alpha EV5
Memory: 189488 kB
Root Device: SCSI disk on /dev/sdb
Root Size/partition table:
alphabox:/home/polarwolf# fdisk -l /dev/sdb
Disk /dev/sdb: 4550 MB, 4550934016 bytes
255 heads, 63 sectors/track, 553 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
3 partitions:
# start end size fstype [fsize bsize cpg]
a: 2 500 499 ext2
b: 501 554* 53* ext2
Output of lspci and lspci -n:
alphabox:/home/polarwolf# lspci
0000:00:06.0 Ethernet controller: Digital Equipment Corporation DECchip
21040 [Tulip] (rev 24)
0000:00:08.0 VGA compatible unclassified device: S3 Inc. 86c864 [Vision
864 DRAM] vers 0
0000:00:09.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide
SCSI (rev 02)
0000:00:0a.0 Non-VGA unclassified device: Intel Corp. 82375EB (rev 05)
0000:00:0c.0 Fibre Channel: Emulex Corporation LP7000 Fibre Channel Host
Adapter (rev 04)
alphabox:/home/polarwolf# lspci -n
0000:00:06.0 Class 0200: 1011:0002 (rev 24)
0000:00:08.0 Class 0001: 5333:88c0
0000:00:09.0 Class 0100: 1077:1020 (rev 02)
0000:00:0a.0 Class 0000: 8086:0482 (rev 05)
0000:00:0c.0 Class 0c04: 10df:f700 (rev 04)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [E]
Reboot: [O]
Comments/Problems:
It works well, until in the last phase it tries to write an aboot
configuration out to disk. The error which shows up in the logging
console is:
main-menu[261]: (process:12921): error: bootcode overlaps with partition
#1. If you really want this, use -f1
aboot-installer: info: Installing aboot on '/dev/sdb'
So I've done some investigation, and it appears that to install aboot
you need some free space on the disk before the first partition
(according to the FAQ on
http://www.alphalinux.org/faq/SRM-HOWTO/srm-aboot.html:
<quote>
We suggest that the disk be partitioned such that the first partition
starts at an offset of 2048 sectors. This leaves 1MB of space for
storing aboot. On a properly partitioned disk, it is then possible to
install aboot as follows (assuming the disk is /dev/sda):
# swriteboot /dev/sda bootlx
On systems where partition c in the entire disk it will be necessary to
'force' the write of aboot. In this case use the -f flag followed by the
partition number (in the case of partition c this is 3):
# swriteboot /dev/sda bootlx -f3
</quote>
Well, it appears that the partitioning tool neither takes the bit of
free space into account nor does it create one bigass BSD label
partition across the entire disk, so the installer will try to write the
boot block right over the partition boundary of the first partition.
That obviously won't work (I know, I tried to force install the boot
block with -f1, it leaves an unbootable system). So, what I did to
resolve this issue is to manually partition the harddisk in the console
on tty2, starting the first partition on the second cylinder of the
disk, leaving ~8MB of free space before the first partition. After
partitioning the disk, I've started the installer's partitioning tool to
format and mount the partitions, and after that d-i happily installs
everything, including aboot. I now have a functional Sarge installation
on my AS500/333, installed with debian-installer.
On a side note, this is the first time I've use debian-installer, and I
can only say that it's very, very nice. I find the partitioning tool a
bit combersome to use though. But maybe that's because I always choose
to do that stuff by hand instead of automagically :-)
--
Regards,
Ferdinand O. Tempel
Your friendly neighborhood linuxops.net administrator.
---------------------------------------
Received: (at 260093-done) by bugs.debian.org; 28 Feb 2005 01:24:38 +0000
>From vorlon@debian.org Sun Feb 27 17:24:38 2005
Return-path: <vorlon@debian.org>
Received: from dsl093-039-086.pdx1.dsl.speakeasy.net (localhost.localdomain) [66.93.39.86]
by spohr.debian.org with esmtp (Exim 3.35 1 (Debian))
id 1D5ZeI-00036X-00; Sun, 27 Feb 2005 17:24:38 -0800
Received: by localhost.localdomain (Postfix, from userid 1000)
id 144C2171D50; Sun, 27 Feb 2005 17:24:35 -0800 (PST)
Date: Sun, 27 Feb 2005 17:24:35 -0800
From: Steve Langasek <vorlon@debian.org>
To: 260093-done@bugs.debian.org
Subject: Re: Fixed in NMU of partman-auto 41
Message-ID: <20050228012434.GA12162@mauritius.dodds.net>
References: <[🔎] E1D5ZIU-0002lG-00@newraff.debian.org>
Mime-Version: 1.0
Content-Type: multipart/signed; micalg=pgp-sha1;
protocol="application/pgp-signature"; boundary="RnlQjJ0d97Da+TV1"
Content-Disposition: inline
In-Reply-To: <[🔎] E1D5ZIU-0002lG-00@newraff.debian.org>
User-Agent: Mutt/1.5.6+20040907i
Delivered-To: 260093-done@bugs.debian.org
X-Spam-Checker-Version: SpamAssassin 2.60-bugs.debian.org_2005_01_02
(1.212-2003-09-23-exp) on spohr.debian.org
X-Spam-Status: No, hits=-3.0 required=4.0 tests=BAYES_00 autolearn=no
version=2.60-bugs.debian.org_2005_01_02
X-Spam-Level:
--RnlQjJ0d97Da+TV1
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
This bug is fixed now in sid; the upload isn't really an NMU, I just didn't
go back to fix up debian/control yet.
--=20
Steve Langasek
postmodern programmer
On Sun, Feb 27, 2005 at 08:02:06PM -0500, Steve Langasek wrote:
> This message was generated automatically in response to a
> non-maintainer upload. The .changes file follows.
>=20
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>=20
> Format: 1.7
> Date: Sun, 27 Feb 2005 15:33:40 -0800
> Source: partman-auto
> Binary: partman-auto
> Architecture: source all
> Version: 41
> Distribution: unstable
> Urgency: low
> Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> Changed-By: Steve Langasek <vorlon@debian.org>
> Description:=20
> partman-auto - Automatically partition storage devices (partman) (udeb)
> Closes: 260093
> Changes:=20
> partman-auto (41) unstable; urgency=3Dlow
> .
> * Colin Watson
> - Add jfs to the valid filesystems list.
> * Steve Langasek
> - Fix the alpha multiuser recipe to use fewer partitions, working
> around a parted problem with full disklabels. Closes: #260093.
> * Updated translations:
> - Bosnian (bs.po) by Safir =C5=A0e=C4=87erovi=C4=87
> - Catalan (ca.po) by Guillem Jover
> - German (de.po) by Dennis Stampfer
> - Greek, Modern (1453-) (el.po) by Greek Translation Team
> - Spanish (Castilian) (es.po) by Javier Fernandez-Sanguino Pe=C3=B1a
> - French (fr.po) by French Team
> - Gallegan (gl.po) by Jacobo Tarrio
> - Hebrew (he.po) by Lior Kaplan
> - Lithuanian (lt.po) by K=C4=99stutis Bili=C5=ABnas
> - Dutch (nl.po) by Bart Cornelis
> - Romanian (ro.po) by Eddy Petrisor
> - Ukrainian (uk.po) by Eugeniy Meshcheryakov
> - Traditional Chinese (zh_TW.po) by Tetralet
> Files:=20
> 9f9b45e3770f7cee85c6b2abe7a26501 624 debian-installer standard partman-a=
uto_41.dsc
> 99eaf611e3ff3d626a65d0db6fe78a03 51847 debian-installer standard partman=
-auto_41.tar.gz
> c2781a89c510fba66473bcd3c440d3dd 35770 debian-installer standard partman=
-auto_41_all.udeb
> package-type: udeb
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.0 (GNU/Linux)
>=20
> iD8DBQFCImueKN6ufymYLloRAg+PAKDU3xTrOi6vURJAF6ajhGpnRbMJVwCgs9Fo
> vSQCv6lOMrJmUA/6xhLuDHA=3D
> =3DYO4k
> -----END PGP SIGNATURE-----
--RnlQjJ0d97Da+TV1
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: Digital signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFCInLSKN6ufymYLloRArW0AJ4suhxYZDQK2I220cahi7V79FjYAgCfWIsE
rHu/BCHlpSNcM4R+uOfdiaI=
=AcHP
-----END PGP SIGNATURE-----
--RnlQjJ0d97Da+TV1--
Reply to: