Bug#296978: Successful install on hppa --- C3000
Package: installation-reports
Debian-installer-version: p.d.o/~jbailey/ from 2005-02-25
uname -a: Linux celebdil 2.6.8-2-32-smp #1 SMP Mon Feb 7 22:19:10 EST 2005 parisc GNU/Linux
Date: Sat Feb 26 00:57:32 EST 2005
Method: Net Install via Daily Build
http://people.debian.org/~jbailey/d-i/hppa/2005-02-25/netboot/2.6/boot.img
Machine: HP Visualize C3000
Processor: PA8500 400MHz
Memory: 2GB
Root Device: /dev/sda
Root Size/partition table:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 48 49136 f0 Linux/PA-RISC boot
/dev/sda2 49 292 249856 82 Linux swap
/dev/sda3 293 780 499712 83 Linux (/)
/dev/sda4 781 8678 8087552 5 Extended
/dev/sda5 781 1734 976880 83 Linux (/var)
/dev/sda6 1735 3641 1952752 83 Linux (/usr)
/dev/sda7 3642 8678 5157872 83 Linux (/home)
Output of lspci and lspci -n:
% lspci
0000:00:0c.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
0000:00:0d.0 Multimedia audio controller: Analog Devices AD1889 sound chip
0000:00:0e.0 IDE interface: National Semiconductor Corporation 87415/87560 IDE (rev 03)
0000:00:0e.1 Bridge: National Semiconductor Corporation 87560 Legacy I/O (rev 01)
0000:00:0e.2 USB Controller: National Semiconductor Corporation USB Controller (rev 02)
0000:00:0f.0 SCSI storage controller: LSI Logic / Symbios Logic 53C896/897 (rev 04)
0000:00:0f.1 SCSI storage controller: LSI Logic / Symbios Logic 53C896/897 (rev 04)
0000:01:04.0 Display controller: Hewlett-Packard Company A4977A Visualize EG (rev 03)
0000:02:01.0 Fibre Channel: Hewlett-Packard Company Tach XL2 Fibre Channel Host Adapter (rev 0b)
0000:03:02.0 Display controller: Hewlett-Packard Company Visualize FX4 (rev 02)
% lspci -n
0000:00:0c.0 0200: 1011:0019 (rev 41)
0000:00:0d.0 0401: 11d4:1889
0000:00:0e.0 0101: 100b:0002 (rev 03)
0000:00:0e.1 0680: 100b:000e (rev 01)
0000:00:0e.2 0c03: 100b:0012 (rev 02)
0000:00:0f.0 0100: 1000:000b (rev 04)
0000:00:0f.1 0100: 1000:000b (rev 04)
0000:01:04.0 0380: 103c:1005 (rev 03)
0000:02:01.0 0c04: 103c:1029 (rev 0b)
0000:03:02.0 0380: 103c:1008 (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
The purpose behind this was to test Debian Installer with the new
2.6.8-2 kernels. Everything seemed to go quite well. Will hopefully
get a chance to test a CD boot soon.
Reply to: