Bug#296221: IBM T42 Succesfull D-I
Package: installation-reports
INSTALL REPORT
Debian-installer-version: D-I rc2 02/19/05
uname -a: Linux alejandro 2.6.9 #1 Sat Feb 19 00:48:59 CST 2005 i686
GNU/Linux
Date: 02/19/05 2PM took about 20 minutes
Method: installed with Net-Inst CD (102MB?). Booted from the CD, did not
use the network.
Machine: IBM T42, Dothan, 512MB, 40GB, Fingerprint reader.
Processor: Pentium M 1.8GHZ 2MB L2 cache
Memory: 512MB DDR2700
Root Device: IDE
Root Size/partition table:
Device Boot Start End Blocks Id System
/dev/hda1 * 1 16560 8346208+ c W95 FAT32 (LBA)
/dev/hda2 16561 28186 5859504 83 Linux
/dev/hda3 28187 77505 24856776 c W95 FAT32 (LBA)
Partition 3 does not end on cylinder boundary.
Output of lspci and lspci -n:
alejandro:~# lspci
0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O
Controller (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller
(rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB
2.0 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller
(rev 01)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA
Storage Controller (rev 01)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon
Mobility M7 LW [Radeon Mobility 7500]
0000:02:00.0 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus
Controller (rev 01)
0000:02:00.1 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus
Controller (rev 01)
0000:02:01.0 Ethernet controller: Intel Corp. 82540EP Gigabit Ethernet
Controller (Mobile) (rev 03)
0000:02:02.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
alejandro:~# lspci -n
0000:00:00.0 0600: 8086:3340 (rev 03)
0000:00:01.0 0604: 8086:3341 (rev 03)
0000:00:1d.0 0c03: 8086:24c2 (rev 01)
0000:00:1d.1 0c03: 8086:24c4 (rev 01)
0000:00:1d.2 0c03: 8086:24c7 (rev 01)
0000:00:1d.7 0c03: 8086:24cd (rev 01)
0000:00:1e.0 0604: 8086:2448 (rev 81)
0000:00:1f.0 0601: 8086:24cc (rev 01)
0000:00:1f.1 0101: 8086:24ca (rev 01)
0000:00:1f.3 0c05: 8086:24c3 (rev 01)
0000:00:1f.5 0401: 8086:24c5 (rev 01)
0000:00:1f.6 0703: 8086:24c6 (rev 01)
0000:01:00.0 0300: 1002:4c57
0000:02:00.0 0607: 104c:ac46 (rev 01)
0000:02:00.1 0607: 104c:ac46 (rev 01)
0000:02:01.0 0200: 8086:101e (rev 03)
0000:02:02.0 0280: 8086:4220 (rev 05)
alejandro:~#
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [OK]
Configure network HW: [OK]
Config network: [OK ]
Detect CD: [OK ]
Load installer modules: [OK ]
Detect hard drives: [OK ]
Partition hard drives: [OK ]
Create file systems: [OK ]
Mount partitions: [OK ]
Install base system: [OK ]
Install boot loader: [OK ]
Reboot: [OK ]
Comments/Problems:
All came out pretty well, installed perfectly. It installed kernel
2.6.8-5 which was pretty up-to-date and everything worked nicely.
insmod /lib/modules/2.6.8-1-386/kernel/drivers/net/e1000/e1000.ko
No matching physical volumes found
No volume groups found
Reading all physical volumes. This may take a while...
Selecting previously deselected package base-files.
Install logs and other status info is available in
/var/log/debian-installer/.
IF YOU NEED THE INFO INTO /VAR/LOG/DEBIAN-INSTALLER, reply me and I'll
send it all.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: