Bug#293160: installation-reports
Package: installation-reports
Debian-installer-version:download sarge-i386-1.iso on Jan. 30th, 2005
uname -a: Linux virtue 2.4.27-speakup #1 Thu Aug 19 21:46:14 CEST 2004 i686 GNU/Linux
Date: Feb. 1st, 2005 0:00-2:00
Method: Burn CD from ISO image and boot by the CD.
Machine:IBM ThinkPad T40 2373-72J
Processor:Pentium M 1.5Ghz
Memory:512MB
Root Device:IDE
Root Size/partition table:
$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda1 75394816 2014512 69550412 3% /
tmpfs 257868 0 257868 0% /dev/shm
Output of lspci and lspci -n:
$ lspci
0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller
(rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller
(rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0
EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller
(rev 01)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage
Controller (rev 01)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus
Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97
Modem Controller (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon
Mobility M7 LW [Radeon Mobility 7500]
0000:02:00.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus
Controller (rev 01)
0000:02:00.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus
Controller (rev 01)
0000:02:01.0 Ethernet controller: Intel Corp. 82540EP Gigabit Ethernet
Controller (Mobile) (rev 03)
0000:02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212
802.11abg NIC (rev 01)
$ lspci -n
0000:00:00.0 0600: 8086:3340 (rev 03)
0000:00:01.0 0604: 8086:3341 (rev 03)
0000:00:1d.0 0c03: 8086:24c2 (rev 01)
0000:00:1d.1 0c03: 8086:24c4 (rev 01)
0000:00:1d.2 0c03: 8086:24c7 (rev 01)
0000:00:1d.7 0c03: 8086:24cd (rev 01)
0000:00:1e.0 0604: 8086:2448 (rev 81)
0000:00:1f.0 0601: 8086:24cc (rev 01)
0000:00:1f.1 0101: 8086:24ca (rev 01)
0000:00:1f.3 0c05: 8086:24c3 (rev 01)
0000:00:1f.5 0401: 8086:24c5 (rev 01)
0000:00:1f.6 0703: 8086:24c6 (rev 01)
0000:01:00.0 0300: 1002:4c57
0000:02:00.0 0607: 104c:ac55 (rev 01)
0000:02:00.1 0607: 104c:ac55 (rev 01)
0000:02:01.0 0200: 8086:101e (rev 03)
0000:02:02.0 0200: 168c:1014 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
This machine can view 1024x768, and I choose vesa as VideoCard ,input
frequency of LCD(H28-96, V50-75, get this value by using KNOPPIX) at
installation.
But default resolution is set to 800x600 and /etc/X11/XF86Config-4
doesn't have 1024x768 entry at "Screen" section, only 800x600 and 640x480.
So I add 1024x768 entry as follows.
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
~~~~~~~~~add
EndSubSection
After reboot, I can change resolution to 1024x768.
Thank you for amazing OS!
Regards,
TOKUNAGA, Dai(dai@virtue.jp
Reply to: