Bug#292888: Installation story on Acer TravelMate 4000WLMi notebook
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 2005-01-13, official sarge-i386-netinst.iso
uname -a: Linux eva 2.4.27-2-686 #1 Thu Dec 30 18:26:31 JST 2004 i686 GNU/Linux
Date: 2005-01-15
Method: bootstrapping (-- more on this later).
Machine: Acer TravelMate 4000WLMi notebook
Processor: Intel(R) Pentium(R) M processor 1.40GHz
Memory: 512Mb
Root Device: IDE
Root Size/partition table:
/dev/hda1 : start= 63, size= 6152832, Id=12 Acer Disk-to-Disk recovery
/dev/hda2 : start= 6152895, size= 8385930, Id=83 /
/dev/hda3 : start= 14538825, size= 20964825, Id= c, bootable XP
/dev/hda4 : start= 35503650, size= 81706590, Id= f
/dev/hda5 : start= 35503713, size= 67087377, Id= b
/dev/hda6 : start=102591153, size= 6297417, Id=83 /usr/local
/dev/hda7 : start=108888633, size= 8321607, Id=83 /home
I have installed grub on /dev/hda
and use bootpart on XP (default bootable partition) to boot on Debian
Output of lspci:
0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02)
0000:00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control Registers (rev 02)
0000:00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration Process Registers (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 855GME GMCH Host-to-AGP Bridge (Virtual PCI-to-PCI) (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
0000:02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
0000:02:04.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
0000:02:06.0 CardBus bridge: Texas Instruments: Unknown device 8031
0000:02:06.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8032
0000:02:06.3 Unknown mass storage controller: Texas Instruments: Unknown device 8033
Output of lspci -n:
0000:00:00.0 0600: 8086:3580 (rev 02)
0000:00:00.1 0880: 8086:3584 (rev 02)
0000:00:00.3 0880: 8086:3585 (rev 02)
0000:00:01.0 0604: 8086:3581 (rev 02)
0000:00:1d.0 0c03: 8086:24c2 (rev 03)
0000:00:1d.1 0c03: 8086:24c4 (rev 03)
0000:00:1d.2 0c03: 8086:24c7 (rev 03)
0000:00:1d.7 0c03: 8086:24cd (rev 03)
0000:00:1e.0 0604: 8086:2448 (rev 83)
0000:00:1f.0 0601: 8086:24cc (rev 03)
0000:00:1f.1 0101: 8086:24ca (rev 03)
0000:00:1f.3 0c05: 8086:24c3 (rev 03)
0000:00:1f.5 0401: 8086:24c5 (rev 03)
0000:00:1f.6 0703: 8086:24c6 (rev 03)
0000:01:00.0 0300: 1002:4e50
0000:02:02.0 0200: 14e4:4401 (rev 01)
0000:02:04.0 0280: 8086:4220 (rev 05)
0000:02:06.0 0607: 104c:8031
0000:02:06.2 0c00: 104c:8032
0000:02:06.3 0180: 104c:8033
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [E]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [E]
Detect hard drives: [E]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [E]
Comments/Problems:
There is an incompatibility between the kernel and my hardhare.
This prevents me booting on most normal ways - e.g. using knoppix or
Debian default boot methods.
I managed to boot knoppix, using the failsafe option.
Debian should also have a way to omit utilizing some of my hardware,
to help the system boot on kernel incompatibilities.
The boot image (and all other boot debian images I tried) did not work.
The system crashed on loading some kernel modules.
I booted using knoppix, formatted the partitions, and used the bootstrapping
to install the system from the network.
I understand that this is a kernel problem, so I tried all other availabe (precompiled) versions of the kernel, but the module still crashes the system.
I include later information about this problem (with one of ythe versions of the kernel)
In order to be able to boot later, I had to prohibit loading the i810_audio module.
Every time Debian rebuilds the modules.conf file, my system is not bootable, and I have to boot using knoppix to correct this (alias i810_audio off).
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Here is how I can reproduce the problem, and
# modprobe i810_audio
Note: /etc/modules.conf is more recent than /lib/modules/2.4.27-1-386/modules.dep
Intel 810 + AC97 Audio, version 1.01, 19:46:39 Dec 1 2004
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xd0000c00 and 0xd0000800, IRQ 10
i810: Intel ICH4 mmio at 0xe0929c00 and 0xe092b800
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Modem codec, id: CXT48 (Unknown)
i810_audio: codec 0 is a softmodem - skipping.
Unable to handle kernel NULL pointer dereference at virtual address 00000024
printing eip:
e0920174
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<e0920174>] Not tainted
EFLAGS: 00010282
eax: dd8ae400 ebx: 00000000 ecx: dd8ae400 edx: dd4ee0a0
esi: dd4ee070 edi: dd4ee108 ebp: dd4ee070 esp: c66dfe58
ds: 0018 es: 0018 ss: 0018
Process modprobe.moduti (pid: 8351, stackpage=c66df000)
Stack: dd8ae400 dd4ee070 dd4ee108 e092512c e09236ca dd4ee070 ffffffff 00000000
00000032 dd4ee070 c0116755 dd4ee070 00000282 00000a04 dd4ee070 00000000
dd4ee070 e0923453 dd4ee070 dd4ee0a0 dd8ae400 00000001 00000000 00000001
Call Trace: [<e092512c>] [<e09236ca>] [<c0116755>] [<e0923453>] [<e092512c>]
[<e0923d35>] [<e092512c>] [<e0925340>] [<c019e9d5>] [<e092512c>] [<e0925340>]
[<c019ea2e>] [<e0925340>] [<e0924219>] [<e0925340>] [<e0924d60>] [<c0117307>]
[<e0924fd8>] [<e0920060>] [<c01081fb>]
Code: 8b 53 24 31 ff 83 7a 08 00 75 0d 66 83 a0 16 02 00 00 fb e9
Segmentation fault
Here is information on the system, when booting
Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS01 at 0x02f8 (irq = 3) is a 16550A
PCI: Found IRQ 10 for device 00:1f.6
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.5
PCI: Sharing IRQ 10 with 02:04.0
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3788 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
Freeing initrd memory: 3788k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 96k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
ICH4: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
PCI: Found IRQ 6 for device 00:1f.1
PCI: Sharing IRQ 6 with 00:1d.2
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
hda: ST960821A, ATA DISK drive
blk: queue e082eb60, I/O limit 4095Mb (mask 0xffffffff)
hdc: PIONEER DVD-RW DVR-K14RA, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 117210240 sectors (60012 MB) w/8192KiB Cache, CHS=7296/255/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 >
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Real Time Clock Driver v1.10f
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
b44.c:v0.93 (Mar, 2004)
PCI: Found IRQ 6 for device 02:02.0
PCI: Sharing IRQ 6 with 00:1d.1
eth0: Broadcom 4400 10/100BaseT Ethernet 00:c0:9f:69:47:48
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
PCI: Found IRQ 10 for device 02:06.2
PCI: Sharing IRQ 10 with 02:06.0
PCI: Sharing IRQ 10 with 02:06.3
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d020a000-d020a7ff] Max Packet=[2048]
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Enabling device 02:06.0 (0104 -> 0106)
PCI: Found IRQ 10 for device 02:06.0
PCI: Sharing IRQ 10 with 02:06.2
PCI: Sharing IRQ 10 with 02:06.3
Yenta ISA IRQ mask 0x08b8, PCI irq 10
Socket status: 30000006
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node dfb115a0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node dfb115a0), AE_NOT_EXIST
shpchp: acpi_shpchprm:\_SB_.PCI0 _CRS fail=0x6
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _CRS fail=0x6
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.HPET._STA] (Node dfb10620), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.HPET._STA] (Node dfb10620), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKA._STA] (Node dfb10740), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKA._STA] (Node dfb10740), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKB._STA] (Node dfb10840), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKB._STA] (Node dfb10840), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKC._STA] (Node dfb10940), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKC._STA] (Node dfb10940), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKD._STA] (Node dfb10a40), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKD._STA] (Node dfb10a40), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKE._STA] (Node dfb10b40), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKE._STA] (Node dfb10b40), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKF._STA] (Node dfb10c40), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKF._STA] (Node dfb10c40), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKG._STA] (Node dfb10d40), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKG._STA] (Node dfb10d40), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKH._STA] (Node dfb10e40), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKH._STA] (Node dfb10e40), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.MOUE._STA] (Node c158e580), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.MOUE._STA] (Node c158e580), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.MOU2._STA] (Node c158e620), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.MOU2._STA] (Node c158e620), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.ECP_._STA] (Node c158e840), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.ECP_._STA] (Node c158e840), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.EPP_._STA] (Node c158e980), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.EPP_._STA] (Node c158e980), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LPTB._STA] (Node c158eac0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LPTB._STA] (Node c158eac0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LPT_._STA] (Node c158ec00), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LPT_._STA] (Node c158ec00), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.COMA._STA] (Node c158ed40), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.COMA._STA] (Node c158ed40), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.FIR_._STA] (Node c158ee80), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.FIR_._STA] (Node c158ee80), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SECN._STA] (Node c1589620), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SECN._STA] (Node c1589620), AE_NOT_EXIST
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00003189ab]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node dfb115a0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node dfb115a0), AE_NOT_EXIST
pciehp: acpi_pciehprm:\_SB_.PCI0 _CRS fail=0x6
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _CRS fail=0x6
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.HPET._STA] (Node dfb10620), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.HPET._STA] (Node dfb10620), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKA._STA] (Node dfb10740), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKA._STA] (Node dfb10740), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKB._STA] (Node dfb10840), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKB._STA] (Node dfb10840), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKC._STA] (Node dfb10940), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKC._STA] (Node dfb10940), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKD._STA] (Node dfb10a40), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKD._STA] (Node dfb10a40), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKE._STA] (Node dfb10b40), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKE._STA] (Node dfb10b40), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKF._STA] (Node dfb10c40), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKF._STA] (Node dfb10c40), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKG._STA] (Node dfb10d40), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKG._STA] (Node dfb10d40), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKH._STA] (Node dfb10e40), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.LNKH._STA] (Node dfb10e40), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.MOUE._STA] (Node c158e580), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.MOUE._STA] (Node c158e580), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.MOU2._STA] (Node c158e620), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.MOU2._STA] (Node c158e620), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.ECP_._STA] (Node c158e840), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.ECP_._STA] (Node c158e840), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.EPP_._STA] (Node c158e980), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.EPP_._STA] (Node c158e980), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LPTB._STA] (Node c158eac0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LPTB._STA] (Node c158eac0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LPT_._STA] (Node c158ec00), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LPT_._STA] (Node c158ec00), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.COMA._STA] (Node c158ed40), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.COMA._STA] (Node c158ed40), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.LDRG] (Node c158e780), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.FIR_._STA] (Node c158ee80), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.SIO_.FIR_._STA] (Node c158ee80), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SECN._STA] (Node c1589620), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SECN._STA] (Node c1589620), AE_NOT_EXIST
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
i810_rng hardware driver 0.9.8 loaded
hw_random: cannot enable RNG, aborting
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 10 for device 00:1d.7
PCI: Setting latency timer of device 00:1d.7 to 64
ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2
ehci_hcd 00:1d.7: irq 10, pci mem e08f3000
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:1d.7: enabled 64bit PCI DMA
PCI: cache line size of 32 is not supported by device 00:1d.7
ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 6 for device 00:1d.0
PCI: Sharing IRQ 6 with 01:00.0
PCI: Setting latency timer of device 00:1d.0 to 64
uhci.c: USB UHCI at I/O 0x1800, IRQ 6
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 6 for device 00:1d.1
PCI: Sharing IRQ 6 with 02:02.0
PCI: Setting latency timer of device 00:1d.1 to 64
uhci.c: USB UHCI at I/O 0x1820, IRQ 6
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 6 for device 00:1d.2
PCI: Sharing IRQ 6 with 00:1f.1
PCI: Setting latency timer of device 00:1d.2 to 64
uhci.c: USB UHCI at I/O 0x1840, IRQ 6
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
b44: eth0: Link is down.
cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x807
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
unloading Kernel Card Services
Here is information on the system after booting
Script started on Sun Jan 16 13:38:23 2005
eva:~# modprobe sound
eva:~# modprobe ac97_codec
eva:~# modprobe i810_audio
Segmentation fault
eva:~# lsmod
Module Size Used by Not tainted
i810_audio 21372 1 (initializing)
ac97_codec 11252 0 [i810_audio]
sound 48872 0 (unused)
soundcore 3268 2 [i810_audio sound]
af_packet 11048 0 (autoclean)
uhci 21468 0 (unused)
ehci-hcd 14796 0 (unused)
usbcore 52268 1 [uhci ehci-hcd]
i810_rng 2368 0 (unused)
yenta_socket 8804 0
pcmcia_core 38020 0 [yenta_socket]
ohci1394 21648 0 (unused)
ieee1394 178724 0 [ohci1394]
ide-scsi 8272 0
scsi_mod 86052 1 [ide-scsi]
b44 12396 1
ide-cd 27072 0
cdrom 26212 0 [ide-cd]
rtc 5768 0 (autoclean)
ext3 65388 1 (autoclean)
jbd 34628 1 (autoclean) [ext3]
ide-detect 288 0 (autoclean) (unused)
piix 7784 1 (autoclean)
ide-disk 12448 1 (autoclean)
ide-core 91832 1 (autoclean) [ide-scsi ide-cd ide-detect piix ide-disk]
unix 12720 0 (autoclean)
eva:~# cat /etc/modules.conf
### This file is automatically generated by update-modules"
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modutils and read
# the manpage for update-modules.
#
### update-modules: start processing /etc/modutils/0keep
# DO NOT MODIFY THIS FILE!
# This file is not marked as conffile to make sure if you upgrade modutils
# it will be restored in case some modifications have been made.
#
# The keep command is necessary to prevent insmod and friends from ignoring
# the builtin defaults of a path-statement is encountered. Until all other
# packages use the new `add path'-statement this keep-statement is essential
# to keep your system working
keep
### update-modules: end processing /etc/modutils/0keep
### update-modules: start processing /etc/modutils/actions
# Special actions that are needed for some modules
# The BTTV module does not load the tuner module automatically,
# so do that in here
post-install bttv insmod tuner
post-remove bttv rmmod tuner
### update-modules: end processing /etc/modutils/actions
### update-modules: start processing /etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use
# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off # Unix
# alias net-pf-2 off # IPv4
# alias net-pf-3 off # Amateur Radio AX.25
# alias net-pf-4 off # IPX
# alias net-pf-5 off # DDP / appletalk
# alias net-pf-6 off # Amateur Radio NET/ROM
# alias net-pf-9 off # X.25
# alias net-pf-10 off # IPv6
# alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off # Acorn Econet
alias net-pf-24 pppoe
alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81 bttv
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
alias cipher-2 des
alias cipher-3 fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5
### update-modules: end processing /etc/modutils/aliases
### update-modules: start processing /etc/modutils/paths
# This file contains a list of paths that modprobe should scan,
# beside the ones that are compiled into the modutils tools
# themselves.
### update-modules: end processing /etc/modutils/paths
### update-modules: start processing /etc/modutils/arch/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc
### update-modules: end processing /etc/modutils/arch/i386
# alias i810_audio off
# alias ac97_codec off
# alias soundcore off
# alias sound off
eva:~# uname -a
Linux eva 2.4.27-1-386 #1 Wed Dec 1 19:43:08 JST 2004 i686 GNU/Linux
eva:~# ls -l /boot
total 5180
-rw-r--r-- 1 root root 541783 Dec 1 11:29 System.map-2.4.27-1-386
-rw-r--r-- 1 root root 44853 Dec 1 10:42 config-2.4.27-1-386
drwxr-xr-x 2 root root 4096 Jan 15 19:02 grub
-rw-r--r-- 1 root root 3878912 Jan 13 05:22 initrd.img-2.4.27-1-386
-rw-r--r-- 1 root root 816054 Dec 1 11:28 vmlinuz-2.4.27-1-386
eva:~# exit
Script done on Sun Jan 16 13:39:47 2005
Here is more information on my modem, that I think causes the problem
(possibly together with the sound card):
UPDATE=2005_Jan_11
ONLY use scanModem downloaded as: http://linmodems.technion.ac.il/packages/scanModem.gz
./scanModem should ONLY be run within a Linux/UNIX partition.
If within a MicroSoft/DOS partition, abort with Ctrl-C now !!!
Copy scanModem.gz to your Linux partition and restart.
Providing detail for device at PCI_bus 0000:00:1f.6
with vendor-ID:device-ID
----:----
Class 0703: 8086:24c6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
SubSystem 1025:0064 Acer Incorporated [ALI]: Unknown device 0064
0000:00:1f.6 0703: 8086:24c6 (rev 03)
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at 2400 [size=256]
I/O ports at 2000 [size=128]
-----PCI_IDs------- --CompilerVer-
Feature List: Primary Subsystem Distr KernelVer kernel default CPU
./scanModem test 8086:24c6 1025:0064 debian 2.4.27-1-386 3.3.5 3.3.5 i686
The soft modem Subsystem operates under a controller
8086:24c6 82801DB ICH4
capable of supporting under Linux AT LEAST modem Subsystem chips from manufacturers:
Broadcom
AgereSystems
Conexant
Intel
Smartlink
The modem has a Conexant codec: CXT
and there is support for the modem controller: 8086:24c6 82801DB ICH4
Some Linux Distributions include the hsfmodem driver.
Search your packages information for "hsfmodem" and "Conexant".
If not found there, download a hsfmodem package from http://www.linuxant.com .
If there is not an exact match with your Linux distribution and your kernel version: 2.4.27-1-386
then kernel-sources must be prepared as described in Modem/DriverCompiling.txt
before the hsfmodem driver compiling can be successfull.
Get and install hsfmodem drivers from http://www.linuxant.com
Please browse the folder Modem/ containing the following files:
1stRead.txt
DriverCompiling.txt
General.txt
ModemData.txt
Rational.txt
Slmodem.txt
SoftModem.txt
Testing.txt
UNSUBSCRIBE.txt
Let me know if you need more information on my system.
Sarantos Kapidakis
sarantos@ionio.gr
Reply to: