Bug#292862: d-i install report
Package: installation-reports
INSTALL REPORT
Debian-installer-version:
http://archive.progeny.com/debian/dists/sarge/main/installer-i386/current//images/netboot/netboot.tar.gz fetched at 2005-01-25
uname -a: Linux griswold 2.4.27-2-386 #1 Thu Jan 20 10:55:08 JST 2005 i586 GNU/Linux
Date: 2005-01-25
Method:
How did you install?
- Boot from dhcpd, install from tftpd-hpa.
What did you boot off?
- The network.
If network install, from where?
- ftp://ftp.se.debian.org/
Proxied?
- No proxy.
Machine: soekris4801
Processor: Geode by NSC at 266 MHz
Memory: 128 MB
Root Device: ide device. HITACHI_DK239A-65B
Root Size/partition table:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda1 255001 53563 187832 23% /
tmpfs 63656 0 63656 0% /dev/shm
/dev/hda9 2187676 32896 2043652 2% /home
/dev/hda8 170010 4160 156780 3% /tmp
/dev/hda5 2202544 266548 1824112 13% /usr
/dev/hda6 984822 70613 861669 8% /var
Output of lspci and lspci -n:
griswold:~# lspci
0000:00:00.0 Host bridge: Cyrix Corporation PCI Master
0000:00:06.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
0000:00:07.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
0000:00:08.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
0000:00:12.0 ISA bridge: National Semiconductor Corporation: Unknown device 0510
0000:00:12.1 Bridge: National Semiconductor Corporation: Unknown device 0511
0000:00:12.2 IDE interface: National Semiconductor Corporation SCx200 IDE (rev 01)
0000:00:12.5 Bridge: National Semiconductor Corporation: Unknown device 0515
0000:00:13.0 USB Controller: Compaq Computer Corporation ZFMicro Chipset USB (rev 08)
griswold:~#
griswold:~# lspci -n
0000:00:00.0 0600: 1078:0001
0000:00:06.0 0200: 100b:0020
0000:00:07.0 0200: 100b:0020
0000:00:08.0 0200: 100b:0020
0000:00:12.0 0601: 100b:0510
0000:00:12.1 0680: 100b:0511
0000:00:12.2 0101: 100b:0502 (rev 01)
0000:00:12.5 0680: 100b:0515
0000:00:13.0 0c03: 0e11:a0f8 (rev 08)
griswold:~#
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
While it is nice that the install automatically detects and makes a note about multiple network interfaces, it would be beneficial to inexperienced users to have about about enabling the interfaces not being used during the install.
--
Søren O. ,''`.
: :' :
GPG key id: 0x1EB2DE66 `. `'
GPG signed mail preferred. `-
Reply to: