Bug#238341: qlogicisp
I observed the same here. It is trying to load qlogicisp. I was not able
to do a successful install yet. Let me know if you want me to do any
thing on this system. I am also attaching the dmesg below. show dev at
SRM gives
>>>sh
dev
dka0.0.0.4.0 DKA0 TOSHIBA CD-ROM XM-6202B
1110
dkd0.0.0.1009.0 DKD0 RZ1CB-BS
0818
dkd100.1.0.1009.0 DKD100 RZ1CB-BS 0818
dva0.0.0.0.1 DVA0
ewa0.0.0.3.0 EWA0 00-00-F8-75-F0-99
ewb0.0.0.11.0 EWB0 08-00-2B-C3-6A-80
pkc0.7.0.1008.0 PKC0 SCSI Bus ID 7 5.57
pkd0.7.0.1009.0 PKD0 SCSI Bus ID 7 5.57
pqa0.0.0.4.0 PQA0 PCI EIDE
pqb0.0.1.4.0 PQB0 PCI EIDE
>>>
I have a serial line connected to this So i should be able to capture
any output that you would be interested.
--
ph: 603-884-5742
~ # dmesg
Linux version 2.4.24-1-generic (herbert@gondolin) (gcc version 3.2.3 20030221 (Debian prerelease)) #1 Wed Feb 18 19:45:11 EST 2004
Booting GENERIC on Miata using machine vector Miata from SRM
Major Options: LEGACY_START
Command line: ramdisk_size=16384 root=/dev/ram devfs=mount,dall console=ttyS0 DEBCONF_PRIORITY=low
memcluster 0, usage 1, start 0, end 236
memcluster 1, usage 0, start 236, end 16383
memcluster 2, usage 1, start 16383, end 16384
freeing pages 236:384
freeing pages 733:16383
reserving pages 733:734
Initial ramdisk at: 0xfffffc0007c58000 (2805812 bytes)
pci: cia revision 1 (pyxis)
On node 0 totalpages: 16383
zone(0): 16383 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: ramdisk_size=16384 root=/dev/ram devfs=mount,dall console=ttyS0 DEBCONF_PRIORITY=low
HWRPB cycle frequency bogus. Estimated 499767319 Hz
Using epoch = 1952
Console: colour VGA+ 80x25
Calibrating delay loop... 988.76 BogoMIPS
Memory: 122200k/131064k available (1617k kernel code, 6976k reserved, 454k data, 176k init)
Dentry cache hash table entries: 16384 (order: 5, 262144 bytes)
Inode cache hash table entries: 8192 (order: 4, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 8192 bytes)
Buffer cache hash table entries: 1024 (order: 0, 8192 bytes)
Page-cache hash table entries: 16384 (order: 4, 131072 bytes)
POSIX conformance testing by UNIFIX
pci: passed tb register update test
pci: passed sg loopback i/o read test
pci: passed pte write cache snoop test
pci: failed valid tag invalid pte reload test (mcheck; workaround available)
pci: passed pci machine check test
pci: tbia workaround enabled
pci: enabling save/restore of SRM state
PCI: Bus 1, bridge: Digital Equipment Corporation DECchip 21152
IO window: 8000-8fff
MEM window: 09000000-0a3fffff
PREFETCH window: 0a400000-0a4fffff
pci: pyxis 8K boundary dma bug - sg dma disabled
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
initialize_kbd: Keyboard reset failed, no ACK
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 2.88M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 2740k freed
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 176k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
srm_env: version 0.0.5 loaded successfully
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
~ #
Reply to: