Bug#231239: Report : beta2 on HP d330uT w/ 17in TFT monitors
Package: installation-reports
We installed 3 d330uT based machines at Solutions Linux 2004 ; of the
3 machines, 2 had a dualhead Quadro 4 graphic card.
Debian-installer-version: Beta2
uname -a: handbuilt 2.6.2-rc1 kernel
Date: 2003-02-02
Method: netinst
Machine: HP d330uT unit with 17in TFT monitor
Processor: Pentium4 2.6 GHz
Memory: 500 MB
Root Device: IDE, single disk on primary master
Root Size/partition table: 1 GB swap on hda1, rest of the disk (~35 GB) on hda2
Output of lspci:
-- For the basic d330uT :
00:00.0 Host bridge: Intel Corp. 82865G/PE/P Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device (rev 02)
00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02)
00:1f.2 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio Controller (rev 02)
05:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5782 Gigabit Ethernet (rev 03)
-- For the d330uT + Quadro 4 graphic card
00:00.0 Host bridge: Intel Corp. 82865G/PE/P Processor to I/O Controller (rev 02)
00:01.0 PCI bridge: Intel Corp. 82865G/PE/P Processor to AGP Controller (rev 02)
00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02)
00:1f.2 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV17GL [Quadro4 200/400 NVS] (rev a3)
05:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5782 Gigabit Ethernet (rev 03)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [E/O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
The machines come with an integreated Broadcom chipset which is
supported by the tg3 driver in the 2.6 kernel. We had to borrow a
3c509 card to install the base system before building a 2.6 kernel.
The mirror configuration entered a loop, we eventually got out of it
at some point.
JB.
--
Julien BLACHE <jblache@debian.org> | Debian, because code matters more
Debian & GNU/Linux Developer | <http://www.debian.org>
Public key available on <http://www.jblache.org> - KeyID: F5D6 5169
GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169
Reply to: