Bug#288034: installation-reports
Package: installation-reports
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/daily/i386/current/sarge-i386-netinst.iso on 12/28/04
uname -a: Linux klamath 2.4.27-1-386 #1 Wed Dec 1 19:43:08 JST 2004 i686 GNU/Linux
Date: 12/30/04 23:00 pst
Method: netinst disk
Machine: HP DL360 G4
Processor: dual xeon 3g
Memory: 2GB
Root Device: scsi off of onboard raid1 (/dev/cciss/c0d0p1)
Root Size/partition table:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/cciss/c0d0p1 / ext3 defaults,errors=remount-ro 0 1
/dev/cciss/c0d0p5 /boot ext3 defaults 0 2
/dev/cciss/c0d0p6 /home ext3 defaults 0 2
/dev/cciss/c0d0p7 /tmp ext3 defaults 0 2
/dev/cciss/c0d0p8 /usr ext3 defaults 0 2
/dev/cciss/c0d0p10 /var ext3 defaults 0 2
/dev/cciss/c0d0p9 none swap sw 0 0
/dev/hda /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
Output of lspci and lspci -n:
klamath:/home/tyler# lspci
0000:00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 0a)
0000:00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port A0 (rev 0a)
0000:00:04.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port B0 (rev 0a)
0000:00:06.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port C0 (rev 0a)
0000:00:1c.0 PCI bridge: Intel Corp. 6300ESB 64-bit PCI-X Bridge (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 6300ESB USB Universal Host Controller (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 6300ESB USB Universal Host Controller (rev 02)
0000:00:1d.4 System peripheral: Intel Corp. 6300ESB Watchdog Timer (rev 02)
0000:00:1d.5 PIC: Intel Corp. 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 6300ESB USB2 Enhanced Host Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 0a)
0000:00:1f.0 ISA bridge: Intel Corp. 6300ESB LPC Interface Controller (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 6300ESB PATA Storage Controller (rev 02)
0000:01:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 01)
0000:01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 01)
0000:02:01.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx (rev 01)
0000:02:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
0000:02:02.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
0000:06:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09)
0000:06:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09)
klamath:/home/tyler# lspci -n
0000:00:00.0 0600: 8086:3590 (rev 0a)
0000:00:02.0 0604: 8086:3595 (rev 0a)
0000:00:04.0 0604: 8086:3597 (rev 0a)
0000:00:06.0 0604: 8086:3599 (rev 0a)
0000:00:1c.0 0604: 8086:25ae (rev 02)
0000:00:1d.0 0c03: 8086:25a9 (rev 02)
0000:00:1d.1 0c03: 8086:25aa (rev 02)
0000:00:1d.4 0880: 8086:25ab (rev 02)
0000:00:1d.5 0800: 8086:25ac (rev 02)
0000:00:1d.7 0c03: 8086:25ad (rev 02)
0000:00:1e.0 0604: 8086:244e (rev 0a)
0000:00:1f.0 0601: 8086:25a1 (rev 02)
0000:00:1f.1 0101: 8086:25a2 (rev 02)
0000:01:03.0 0300: 1002:4752 (rev 27)
0000:01:04.0 0880: 0e11:b203 (rev 01)
0000:01:04.2 0880: 0e11:b204 (rev 01)
0000:02:01.0 0104: 0e11:0046 (rev 01)
0000:02:02.0 0200: 14e4:1648 (rev 10)
0000:02:02.1 0200: 14e4:1648 (rev 10)
0000:06:00.0 0604: 8086:0329 (rev 09)
0000:06:00.2 0604: 8086:032a (rev 09)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [0]
Configure network HW: [0]
Config network: [0]
Detect CD: [0]
Load installer modules: [0]
Detect hard drives: [0]
Partition hard drives: [0]
Create file systems: [0]
Mount partitions: [0]
Install base system: [0]
Install boot loader: [0]
Reboot: [E]
Comments/Problems:
First try was with 2.6.8 and it panicked on the reboot; last message was: 426: cannot open dev/console: no such file
I re-tried with 2.4.27 and it came up perfectly.
Great job. THANKS!!!
--
Tyler Johnson <tyler@greenmuseum.org>
Reply to: