Bug#285296: AMD64 installation report
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 2004-12-06 http://mirrors.uwa.edu.au/linux/debian-amd64
uname -a: Linux martello 2.6.8-9-amd64-k8 #1 Sat Dec 4 23:16:23 CET 2004 x86_64 GNU/Linux
Date: 2004-12-12
Method: PXE boot from local tftp server and nearby Debian AMD64 mirror.
Machine has no floppy or CDROM device.
Machine: Custom built dual opteron file server
Processor: Dual Opteron 242
Memory: 2 GB
Root Device: 36 GB Western Digital Raptor 10,000 RPM SATA
Root Size/partition table:
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/system-rootusr
9.9G 288M 9.4G 3% /
/dev/sda1 89M 11M 73M 13% /boot
/dev/mapper/reliable-home
40G 33M 39G 1% /home
/dev/mapper/system-var
5.0G 107M 4.8G 3% /var
/dev/system is an LVM vg of /dev/sda, the 36gig WD Raptor
/dev/reliable is an LVM vg of /dev/md0 and /dev/md1 which are degraded (one disk each) RAID 1 arrays over 2 Seagate Barracuda 200GB SATA 7200rpm drives. There are two more of these drives in the machine, but we are waiting on a PCI-X SATA controller for production use.
Output of lspci and lspci -n:
0000:00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07)
0000:00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05)
0000:00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03)
0000:00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02)
0000:00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05)
0000:00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12)
0000:00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01)
0000:00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12)
0000:00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:02:09.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03)
0000:02:09.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03)
0000:03:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
0000:03:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
0000:03:05.0 Unknown mass storage controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)
0000:03:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:03:08.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 10)
0000:00:06.0 0604: 1022:7460 (rev 07)
0000:00:07.0 0601: 1022:7468 (rev 05)
0000:00:07.1 0101: 1022:7469 (rev 03)
0000:00:07.2 0c05: 1022:746a (rev 02)
0000:00:07.3 0680: 1022:746b (rev 05)
0000:00:0a.0 0604: 1022:7450 (rev 12)
0000:00:0a.1 0800: 1022:7451 (rev 01)
0000:00:0b.0 0604: 1022:7450 (rev 12)
0000:00:0b.1 0800: 1022:7451 (rev 01)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:00:19.0 0600: 1022:1100
0000:00:19.1 0600: 1022:1101
0000:00:19.2 0600: 1022:1102
0000:00:19.3 0600: 1022:1103
0000:02:09.0 0200: 14e4:1648 (rev 03)
0000:02:09.1 0200: 14e4:1648 (rev 03)
0000:03:00.0 0c03: 1022:7464 (rev 0b)
0000:03:00.1 0c03: 1022:7464 (rev 0b)
0000:03:05.0 0180: 1095:3114 (rev 02)
0000:03:06.0 0300: 1002:4752 (rev 27)
0000:03:08.0 0200: 8086:1229 (rev 10)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [E]
Reboot: [ ]
Comments/Problems:
Initially we tried setting up the entirity of /dev/sda (WD Raptor) with LVM, however neither lilo (which d-i tried) nor grub could boot from them on this architecture. Upon reinstalling with a separate /boot d-i installed grub which worked fine.
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: