Bug#284648: Configuration problems with aptitude
Package: installation-reports
Debian-installer-version: 7/12/2004 from
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc2/sarge-i
386-netinst.iso
uname -a: Linux cvsserver 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004
i686 GNU/Linux
Date: 7/12/2004 18:20
Method: using a image for the installation from the net; no proxy, only
a firewall
Machine: M Mitas
Processor: Pentium IV
Memory: 512 MB
Root Device: <IDE Quantum...>
Root Size/partition table: <38 GB of ext3 1.6GB of swap>
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM
Controller/Host-Hub Interface (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE
Host-to-AGP Bridge (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB
2.0 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 82)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC
Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L)
UltraATA-100 IDE Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV18
[GeForce4 MX 440 AGP 8x] (rev a2)
0000:02:05.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T
(rev 01)
0000:00:00.0 0600: 8086:2560 (rev 02)
0000:00:01.0 0604: 8086:2561 (rev 02)
0000:00:1d.0 0c03: 8086:24c2 (rev 02)
0000:00:1d.1 0c03: 8086:24c4 (rev 02)
0000:00:1d.2 0c03: 8086:24c7 (rev 02)
0000:00:1d.7 0c03: 8086:24cd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev 82)
0000:00:1f.0 0601: 8086:24c0 (rev 02)
0000:00:1f.1 0101: 8086:24cb (rev 02)
0000:00:1f.3 0c05: 8086:24c3 (rev 02)
0000:00:1f.5 0401: 8086:24c5 (rev 02)
0000:01:00.0 0300: 10de:0181 (rev a2)
0000:02:05.0 0200: 14e4:4401 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
1. The boot loader has made some problem on the other disk to
pre-existent Windows XP (which cannot boot anymore). Any solution for
that?
2. It was not possible to find "cvs" into aptitude: there was some
"corruption into the files" (the message of aptitude) and I had to
launch dselect to update the package list and to find cvs again.
Patrick Zanon, Dr., Ing. Isolcell Italia Spa
Electronic Department Via Meucci, 7
patrick.zanon@isolcell.it 39055 - Laives (BZ)
ITALY
Tel: +39.0471.954050 Web: www.isolcell.it
Fax: +39.0471.953575 E-mail:
isolcell@isolcell.it
------------------------------------------------------------------------
---
Disclaimer
This E-mail is intended only for the address(es) explicitly indicated in
the header; thus, it may not be transmitted, nor made available for use,
by
any other person which is not included in the recipient list. If you
receive this message in error, please delete its content, and inform us
immediately. Thanks.
Reply to: