Bug#284587: INSTALL REPORT
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 18-Nov-2004 http://ftp.fi.debian.org/debian/dists/testing/main/installer-i386/current/images/floppy/
uname -a: Linux xyz 2.4.27-1-686 #1 Fri Sep 3 06:28:00 UTC 2004 i686 GNU/Linux
Date: 3-Dec-2003
Method: How did you install? Net. What did you boot off? Floppy. If network
install, from where? ftp.fi.debian.org Proxied? Yes
Machine: Osborne POWER 133 AE7F-800-B4
Processor: Intel Pentium III (Coppermine) stepping 06, 803.430 MHz
Memory: 383MB LOWMEM
Root Device: IDE: QUANTUM FIREBALLP LM15, ATA DISK drive, 15019 MB
Root Size/partition table:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda3 / xfs defaults 0 1
/dev/hda1 /boot ext3 defaults 0 2
/dev/hda2 none swap sw 0 0
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
# cat /proc/partitions
major minor #blocks name rio rmerge rsect ruse wio wmerge wsect wuse running use aveq
22 0 125842 hdc 314 4149 17840 6060 0 0 0 0 -42 8370156 277737
3 0 14667345 ide/host0/bus0/target0/lun0/disc 35380 105208 1120564 465260 116862 458252 4584731 26452630 -1 8191016 18536693
3 1 96358 ide/host0/bus0/target0/lun0/part1 36 597 1266 690 37 24 122 13350 0 12770 14040
3 2 1951897 ide/host0/bus0/target0/lun0/part2 395 2120 20120 19090 855 5383 51784 158700 0 17130 177920
3 3 12619057 ide/host0/bus0/target0/lun0/part3 34947 102485 1099162 445470 115970 452845 4532825 26280580 0 544440 26728500
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8605 [ProSavage PM133] (rev 81)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8605 [PM133 AGP]
0000:00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
0000:00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10)
0000:00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
0000:00:0e.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22)
0000:00:11.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04)
0000:00:00.0 0600: 1106:0605 (rev 81)
0000:00:01.0 0604: 1106:8605
0000:00:04.0 0601: 1106:0686 (rev 22)
0000:00:04.1 0101: 1106:0571 (rev 10)
0000:00:04.4 0600: 1106:3057 (rev 30)
0000:00:0e.0 0200: 1011:0009 (rev 22)
0000:00:11.0 0200: 10b7:9200 (rev 74)
0000:01:00.0 0300: 102b:0525 (rev 04)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O-]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Users should be allowed to make their own networking configuration, even if
there is working DHCP server in network. I didn't find any way to change
network settings once installer decided for me that settings got from
DHCP-server are fine.
About the translation: If everything is translated to Finnish (my native
language), why there is still buttons like <Yes>, <No>, <Cancel> with each
question. Buttons text should be translated too.
Reply to: