[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Bug#281839: sid-amd64-netinst.iso install report



This problem has been fixed:

The Gigabyte GA-K8NS Pro motherboard has four points you can plug a SATA
drive cable.
They are SATA0_SB and SATA1_SB, both controlled by the onboard nVIDIA
nForce3 250 chipset. I tried one of these and had no luck with 2.6
kernel, sarge i386 or sid-amd64. Could not detect my Seagate ST380013AS SATA
drive.
Then there are SATA0_SII and SATA1_SII, both controlled by the built-in
Silicon Image Sil3512 chipset. I swapped the cable into SATA0_SII socket
and rebooted. Straight away the drive was detected:
scsi3 : sata_sil
  Vendor: ATA       Model: ST380013AS        Rev: 3.18
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB)
SCSI device sda: drive cache: write back
 /dev/scsi/host2/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0

I am able to mount the drive.
The network, sound, video and USB drivers are all working and the Firewire controller is recognised.




Reply to: