Bug#283780: Install report: rc2 on PowerBook G3, all good, but miss LVM
Package: installation-reports
INSTALL REPORT
Debian-installer-version: rc2
uname -a: Linux andrewpollock 2.6.8-powerpc #1 Sun Oct 3 13:22:21 CEST 2004 ppc GNU/Linux
Date: Wed Dec 1 21:15:24 EST 2004
Method: netinst CD
Machine: Apple PowerBook G4
Processor:
Memory:
Root Device: <IDE? SCSI? Name of device?>
Root Size/partition table:
/dev/hda
# type name length base ( size ) system
/dev/hda1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map
/dev/hda2 Apple_HFS Apple_HFS_Untitled_2 83623936 @ 262208 ( 39.9G) HFS
/dev/hda3 Apple_Bootstrap bootstrap 1602 @ 64 (801.0k) NewWorld bootblock
/dev/hda4 Apple_Free Extra 260542 @ 1666 (127.2M) Free space
/dev/hda5 Apple_UNIX_SVR2 swap 1000001 @ 84886145 (488.3M) Linux swap
/dev/hda6 Apple_UNIX_SVR2 root 39062501 @ 85886146 ( 18.6G) Linux native
/dev/hda7 Apple_Free Extra 1000001 @ 83886144 (488.3M) Free space
/dev/hda8 Apple_Free Extra 31352841 @ 124948647 ( 15.0G) Free space
Filesystem Type Size Used Avail Use% Mounted on
/dev/hda6 ext3 20G 271M 19G 2% /
tmpfs tmpfs 264M 0 264M 0% /dev/shm
Block size=512, Number of Blocks=156301488
DeviceType=0x0, DeviceId=0x0
Output of lspci and lspci -n:
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
0000:00:10.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
0001:01:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI
0001:01:12.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
0001:01:13.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
0001:01:17.0 ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O
0001:01:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:01:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:01:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:01:1b.0 USB Controller: NEC Corporation USB (rev 43)
0001:01:1b.1 USB Controller: NEC Corporation USB (rev 43)
0001:01:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
0002:06:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI
0002:06:0d.0 ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100
0002:06:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81)
0002:06:0f.0 ffff: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev ff)
0000:00:0b.0 0600: 106b:0034
0000:00:10.0 0300: 1002:4e50
0001:01:0b.0 0600: 106b:0035
0001:01:12.0 0280: 14e4:4320 (rev 03)
0001:01:13.0 0607: 104c:ac56
0001:01:17.0 ff00: 106b:003e
0001:01:18.0 0c03: 106b:003f
0001:01:19.0 0c03: 106b:003f
0001:01:1a.0 0c03: 106b:003f
0001:01:1b.0 0c03: 1033:0035 (rev 43)
0001:01:1b.1 0c03: 1033:0035 (rev 43)
0001:01:1b.2 0c03: 1033:00e0 (rev 04)
0002:06:0b.0 0600: 106b:0036
0002:06:0d.0 ff00: 106b:003b
0002:06:0e.0 0c00: 106b:0031 (rev 81)
0002:06:0f.0 ffff: 106b:0032 (rev ff)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Still no LVM support? Partman tantalisingly has the "Configure LVM option"
but there's still no way to make an LVM PV that I can see...
Reply to: