Bug#283391: Didn't detect Genius MF3000 ethernet card
Package: installation-reports
INSTALL REPORT
Debian-installer-version: Sarge netinst RC2
uname -a: Linux debian1 2.6.8-1-386 #1 Thu Nov 11 12:18:43 EST 2004 i686 GNU/Linux
Date: Fri Nov 26 02:31:35 GMT 2004
Method: CD boot, netinst
Machine: Rock Sigma Laptop, a re-badged Mitac 6120L
Processor: Intel Celeron 433
Memory: 128M
Root Device: IDE /dev/hda
Root Size/partition table:
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:08.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
0000:00:08.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
0000:00:09.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
0000:00:0a.0 Communication controller: Lucent Microelectronics F-1156IV WinModem (V90, 56KFlex) (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro AGP-133 (rev dc)
0000:02:00.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
0000:00:00.0 0600: 8086:7190 (rev 03)
0000:00:01.0 0604: 8086:7191 (rev 03)
0000:00:07.0 0601: 8086:7110 (rev 02)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 02)
0000:00:08.0 0607: 104c:ac1c (rev 01)
0000:00:08.1 0607: 104c:ac1c (rev 01)
0000:00:09.0 0401: 1013:6003 (rev 01)
0000:00:0a.0 0780: 11c1:044a (rev 01)
0000:01:00.0 0300: 1002:4c42 (rev dc)
0000:02:00.0 0200: 1011:0019 (rev 41)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [E]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Failed to detect my Genius MF3000 CardBus ethernet card automatically, I
had to select the tulip module manually from the list. Other than that,
the install worked well.
Reply to: