[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#281839: sid-amd64-netinst.iso install report



Package: installation-reports

INSTALL REPORT

Debian-installer-version:
http://debian-amd64.alioth.debian.org/install-images/sid-amd64-netinst.iso 26 Oct 2004
uname -a: 
Date: Nov 17 2004
Method: Downloaded sid-amd64-netinst.iso, burnt to CD, booted from CD

Machine: Home assembled
Processor: AMD Athlon 64 3000+
Memory: 2 x 512MB Geil PC3200 400MHz DDR Dual Channel, total 1024MB
Root Device: hde Seagate ST380013AS SATA 80GB 7200rpm 8MB cache
Root Size/partition table:  Install got stuck at partitioniong:
"No partitionable media found."
Output of lspci and lspci -n:
scoop@my64:~$ lspci
0000:00:00.0 Host bridge: nVidia Corporation: Unknown device 00e1 (rev
a1)
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 00e0 (rev
a2)
0000:00:01.1 SMBus: nVidia Corporation: Unknown device 00e4 (rev a1)
0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 00e7
(rev a1)
0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 00e7
(rev a1)
0000:00:02.2 USB Controller: nVidia Corporation: Unknown device 00e8
(rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation: Unknown
device 00ea (rev a1)
0000:00:08.0 IDE interface: nVidia Corporation: Unknown device 00e5 (rev
a2)
0000:00:0a.0 IDE interface: nVidia Corporation: Unknown device 00e3 (rev
a2)
0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 00e2 (rev
a2)
0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 00ed (rev
a2)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: nVidia Corporation NV18
[GeForce4 MX 4000 AGP 8x] (rev a4)
0000:02:0b.0 Ethernet controller: Marvell Technology Group Ltd. Yukon
Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
0000:02:0c.0 RAID bus controller: Integrated Technology Express, Inc.
IT/ITE8212 Dual channel ATA RAID controller (PCI version seems to be
IT8212, embedded seems (rev 11)
0000:02:0d.0 RAID bus controller: Silicon Image, Inc. (formerly CMD
Technology Inc) SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev
01)
0000:02:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link)
scoop@my64:~$ lspci -n
0000:00:00.0 0600: 10de:00e1 (rev a1)
0000:00:01.0 0601: 10de:00e0 (rev a2)
0000:00:01.1 0c05: 10de:00e4 (rev a1)
0000:00:02.0 0c03: 10de:00e7 (rev a1)
0000:00:02.1 0c03: 10de:00e7 (rev a1)
0000:00:02.2 0c03: 10de:00e8 (rev a2)
0000:00:06.0 0401: 10de:00ea (rev a1)
0000:00:08.0 0101: 10de:00e5 (rev a2)
0000:00:0a.0 0101: 10de:00e3 (rev a2)
0000:00:0b.0 0604: 10de:00e2 (rev a2)
0000:00:0e.0 0604: 10de:00ed (rev a2)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:00.0 0300: 10de:0185 (rev a4)
0000:02:0b.0 0200: 11ab:4320 (rev 13)
0000:02:0c.0 0104: 1283:8212 (rev 11)
0000:02:0d.0 0104: 1095:3512 (rev 01)
0000:02:0e.0 0c00: 104c:8024
scoop@my64:~$

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [E ]
Configure network HW:   [ ]
Config network:         [ ]
Detect CD:              [ ]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Create file systems:    [ ]
Mount partitions:       [ ]
Install base system:    [ ]
Install boot loader:    [ ]
Reboot:                 [ ]

Comments/Problems:
First I tried i386 sarge with 2.6 kernel, cds dated Oct 15 2004.
Install stopped at partitioning: "No partitionable media found"
Then tried i386 sarge with 2.4: Install got right thru to tasksel and
got stuck. I installed gdm, gnome, x-windows-system with aptitude and
then tasksel worked to get the rest of the Desktop stuff.
Sound and network not working as reported (by Axel?) on debian-amd64
list yesterday. This is the system I am writing this on.
Then downloaded sid-amd64-netinst.iso and tried to boot from the cd i
made.
Install got stuck again at partitioning. Tried booting with the hd=stx
bla bla option to see if that would work with the Seagate hd. Got stuck
at partitioning again. Do I have to put hd=st380013as or is it OK to put
hd=stx???





Reply to: