[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

pre-rc2 installation report



Package: installation-reports

Debian-installer-version: pre-rc2 net install image 22-10-2004
uname -a: Linux RHEL 2.6.8-ck9 #2 Fri Oct 29 09:13:06 IST 2004 i686 GNU/Linux
Date: <Date and time of the install>
Method: Network install; cd; installed from india  

Machine: compaq 2591AT
Processor:p4 2.5 mhz
Memory:128 mb
Root Device: /dev/hda1
Root Size/partition table: Disk /dev/hda: 30.0 GB, 30005821440 bytes
255 heads, 63 sectors/track, 3648 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

/dev/hda1             2.3G  903M  1.3G  41% /

Output of lspci and lspci -n: 
0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device cbb2 (rev 02)
0000:00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M]
0000:00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02)
0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]to 
0000:00:08.0 Modem: ALi Corporation Intel 537 [M5457 AC-Link Modem]
0000:00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
0000:00:0b.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 50)
0000:00:0b.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 50)
0000:00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
0000:00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
0000:00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
0000:00:11.0 Bridge: ALi Corporation M7101 PMU
0000:00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
0000:01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 340M


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [E] (The installer got stuck at this point and didnt proceed) 
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Create file systems:    [ ]
Mount partitions:       [ ]
Install base system:    [ ]
Install boot loader:    [ ]
Reboot:                 [ ]

Comments/Problems:

This installer worked flawlessly on my assembled (AMD + nvidia gforce 400MX + 128 mb) and (p4 + nvidia p4pE + 256 mb) but fails on my laptop) 

Attachment: signature.asc
Description: This is a digitally signed message part


Reply to: