Bug#279068: installation-reports
Package: installation-reports
Debian-installer-version: 2004-10-22 sarge-i386-netinst.iso
uname -a: Linux grigri 2.6.8-1-386 #1 Mon Sep 13 23:29:55 EDT 2004 i686 GNU/Linux
Date: 2004-10-22
Method: netinst CD image, with Debian base
Machine: Toshiba Satellite A30
Processor: Intel Celeron 2.60GHz
Memory: 256Mo
Root Device: IDE /dev/hda2
Root Size/partition table:
root@grigri:[phil]# fdisk -l
Disk /dev/hda: 40.0 GB, 40007761920 bytes
255 heads, 63 sectors/track, 4864 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 1217 9775521 7 HPFS/NTFS
/dev/hda2 1218 2433 9767520 83 Linux
/dev/hda3 2434 2494 489982+ 82 Linux swap
/dev/hda4 2495 4864 19037025 5 Extended
/dev/hda5 2495 3710 9767488+ 83 Linux
/dev/hda6 3711 3953 1951866 b W95 FAT32
/dev/hda7 3954 4561 4883728+ 83 Linux
/dev/hda8 4562 4864 2433816 83 Linux
phil@grigri:[phil]$ mount
/dev/hda2 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
/dev/hda7 on /distrib type ext3 (rw)
/dev/hda6 on /echange type vfat (rw)
/dev/hda5 on /home type ext2 (rw)
/dev/hda8 on /rab type ext2 (rw)
usbfs on /proc/bus/usb type usbfs (rw)
Output of lspci and lspci -n:
phil@grigri:[phil]$ lspci
0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02)
0000:00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control Registers (rev 02)
0000:00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration Process Registers (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
0000:00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
0000:02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
0000:02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:02:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus
Controller (rev 01)
phil@grigri:[phil]$ lspci -n
0000:00:00.0 0600: 8086:3580 (rev 02)
0000:00:00.1 0880: 8086:3584 (rev 02)
0000:00:00.3 0880: 8086:3585 (rev 02)
0000:00:02.0 0300: 8086:3582 (rev 02)
0000:00:02.1 0380: 8086:3582 (rev 02)
0000:00:1d.0 0c03: 8086:24c2 (rev 03)
0000:00:1d.1 0c03: 8086:24c4 (rev 03)
0000:00:1d.2 0c03: 8086:24c7 (rev 03)
0000:00:1d.7 0c03: 8086:24cd (rev 03)
0000:00:1e.0 0604: 8086:2448 (rev 83)
0000:00:1f.0 0601: 8086:24cc (rev 03)
0000:00:1f.1 0101: 8086:24ca (rev 03)
0000:00:1f.3 0c05: 8086:24c3 (rev 03)
0000:00:1f.5 0401: 8086:24c5 (rev 03)
0000:00:1f.6 0703: 8086:24c6 (rev 03)
0000:02:00.0 0c00: 1106:3044 (rev 80)
0000:02:01.0 0200: 10ec:8139 (rev 10)
0000:02:04.0 0607: 1524:1410 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
No problems : all works really fine!
Just a problem in the X install (it's not a default on the base
installer) : I need to boot a knoppix to have a good XF86Config.
--
Philippe Brochard <hocwp_NO@SPAM_free.fr>
http://hocwp.free.fr
-=-= http://www.gnu.org/home.fr.html =-=-
Reply to: