Bug#279016: (no subject)
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 2004-10-30 from
http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/i386/pre-rc2/sarge-i386-netinst.iso
uname -a: Linux cirrus 2.6.9 #1 Sat Oct 30 13:05:48 PDT 2004 i686 GNU/Linux
Date: 2004-10-30 11:34 PDT
Method: How did you install? What did you boot off? If network
install, from where? Proxied?
-Booted from CD-ROM using 2.6 kernel option
-Installed complete base system
-Used network to apply updated packages
Machine: Dell Dimension V433c
Processor: Intel Celeron 433MHz
Memory: 192MB
Root Device: /dev/hda3
Root Size/partition table: 2GB
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge (rev 03)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:0c.0 Multimedia audio controller: Yamaha Corporation YMF-724F
[DS-1 Audio Controller] (rev 03)
0000:00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro
AGP 1X/2X (rev 5c)
0000:00:00.0 0600: 8086:7190 (rev 03)
0000:00:01.0 0604: 8086:7191 (rev 03)
0000:00:07.0 0601: 8086:7110 (rev 02)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 02)
0000:00:0c.0 0401: 1073:000d (rev 03)
0000:00:0e.0 0200: 10ec:8139 (rev 10)
0000:00:0f.0 0200: 10ec:8139 (rev 10)
0000:01:00.0 0300: 1002:4742 (rev 5c)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
No problems.
Install logs and other status info is available in
/var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: