Bug#276095: Package: installation-reports
Package: installation-reports
Debian-installer-version:
http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/i386/pre-rc2/sarge-i386-netinst.iso>
downloaded the 20041006
uname -a: Linux vuelta 2.6.8-1-386 #1 Mon Sep 13 23:29:55 EDT 2004 i686
GNU/Linux
Date: 20041011
Method: Boot from a cdrom burned from the iso dowloaded. The network
installation started by itself. Not proxied.
Machine: i686 -- assembled.
Processor: Motherboard LVMM3 Duron Pro 3000A+
Memory: 512
Root Device: IDE
Root Size/partition table:
Disk /dev/hda: 40.0 GB, 40020664320 bytes
16 heads, 63 sectors/track, 77545 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 30473 15358108+ 7 HPFS/NTFS
/dev/hda2 30474 32410 976248 82 Linux swap
/dev/hda3 * 32411 47911 7812504 83 Linux
/dev/hda4 47912 77545 14935536 83 Linux
Output of lspci and lspci -n:
~$ lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8375 [KM266/KL266] Host
Bridge
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
(rev 74)
0000:01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8
KM266/KL266]
~$ lspci -n
0000:00:00.0 0600: 1106:3116
0000:00:01.0 0604: 1106:b091
0000:00:10.0 0c03: 1106:3038 (rev 80)
0000:00:10.1 0c03: 1106:3038 (rev 80)
0000:00:10.2 0c03: 1106:3038 (rev 80)
0000:00:10.3 0c03: 1106:3104 (rev 82)
0000:00:11.0 0601: 1106:3177
0000:00:11.1 0101: 1106:0571 (rev 06)
0000:00:11.5 0401: 1106:3059 (rev 50)
0000:00:12.0 0200: 1106:3065 (rev 74)
0000:01:00.0 0300: 5333:8d04
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Very nice session. Thanks for the great job. The only problem I met
is related to xfree. The xdebconfigurator finds a VIDEO CARD: S3
ProSavage DDR-K and declares the driver is savage. But once
configuring xfree with debconf, it only works if I select vesa,
instead of savage.
Cheers,
--
Sébastien
Reply to: