Bug#273065: Installation report
Package: installation-reports
INSTALL REPORT
Debian-installer-version: daily build 20040923 (businesscard)
uname -a:
Linux feynman 2.6.8-1-386 #1 Sat Aug 28 13:18:58 EDT 2004 i686 GNU/Linux
Date: 20040923
Method:
Boot from CD, network configuration from DHCP
Packages retrieved from internet
Machine:
Processor: AMD Athlon 64 3500+
Memory: 1 GB
Root Device: SATA, Samsung SP1614C
Root Size/partition table:
/dev/sda1 / ext3 7GB
/dev/sda2 ext3 7GB (reserved for amd64 /)
/dev/sda7 /home ext3 130GB
/dev/sda6 /var ext3 15GB
/dev/sda5 none swap 1GB
/dev/hda /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0282
0000:00:00.1 Host bridge: VIA Technologies, Inc.: Unknown device 1282
0000:00:00.2 Host bridge: VIA Technologies, Inc.: Unknown device 2282
0000:00:00.3 Host bridge: VIA Technologies, Inc.: Unknown device 3282
0000:00:00.4 Host bridge: VIA Technologies, Inc.: Unknown device 4282
0000:00:00.7 Host bridge: VIA Technologies, Inc.: Unknown device 7282
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South]
0000:00:05.0 VGA compatible controller: STMicroelectronics STG4000 [3D Prophet Kyro Series] (rev 01)
0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
0000:00:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
lspci -n
0000:00:00.0 0600: 1106:0282
0000:00:00.1 0600: 1106:1282
0000:00:00.2 0600: 1106:2282
0000:00:00.3 0600: 1106:3282
0000:00:00.4 0600: 1106:4282
0000:00:00.7 0600: 1106:7282
0000:00:01.0 0604: 1106:b188
0000:00:05.0 0300: 104a:0010 (rev 01)
0000:00:0b.0 0200: 10ec:8169 (rev 10)
0000:00:0e.0 0c00: 1106:3044 (rev 46)
0000:00:0f.0 0104: 1106:3149 (rev 80)
0000:00:0f.1 0101: 1106:0571 (rev 06)
0000:00:10.0 0c03: 1106:3038 (rev 81)
0000:00:10.1 0c03: 1106:3038 (rev 81)
0000:00:10.2 0c03: 1106:3038 (rev 81)
0000:00:10.3 0c03: 1106:3038 (rev 81)
0000:00:10.4 0c03: 1106:3104 (rev 86)
0000:00:11.0 0601: 1106:3227
0000:00:11.5 0401: 1106:3059 (rev 60)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [E/O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I first tried to start the installation in default mode (2.4 kernel)
On first hardware detection the system hang whilke trying to install
sd_mod. While it is certainly acceptable that on a SATA machine install
only works with 2.6, the installer shouldn't hang, but give a meaningful
error message. After booting with linux2.6 the install run flawlessly.
Great work!
Gruesse,
--
Frank Lichtenheld <djpig@debian.org>
www: http://www.djpig.de/
Reply to: