Package: installation-reports Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/alpha/20040828/sarge-alpha-netinst.iso uname -a: Linux buddha 2.4.26-1-generic #1 Tue Aug 3 22:46:34 CEST 2004 alpha GNU/Linux Date: Sat Aug 28 18:00:00 CDT 2004 Method: Booted and installed from netinst CD image Machine: AlphaServer 2100 4/275 Processor: EV45 (Sable) Memory: 512MB Root Device: DAC960 RAID controller (/dev/rd/c0d0p3) Root Size/partition table: # start end size fstype [fsize bsize cpg] a: 1* 1* 0* ext2 b: 1* 39* 38* ext2 /boot c: 39* 3894* 3855* ext2 / d: 3894* 4091 197* swap Output of lspci and lspci -n: 0000:00:00.0 Ethernet controller: Digital Equipment Corporation DECchip 21040 [Tulip] (rev 23) 0000:00:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 02) 0000:00:02.0 Non-VGA unclassified device: Intel Corp. 82375EB/SB PCI to EISA Bridge (rev 04) 0000:00:06.0 RAID bus controller: Mylex Corporation DAC960P (rev 02) 0000:00:00.0 0200: 1011:0002 (rev 23) 0000:00:01.0 0100: 1000:0001 (rev 02) 0000:00:02.0 0000: 8086:0482 (rev 04) 0000:00:06.0 0104: 1069:0001 (rev 02) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Everything worked! Now that the kernel has been fixed, the partitioner fixed, makedev tweaked, and aboot-installer updated, I can now do an installation without any problems on my Alpha with the DAC960 controller as the root device. -- Nathan Poznick <poznick@conwaycorp.net> Anyway, my money is still on use strict vars . . . -- Larry Wall
Attachment:
signature.asc
Description: Digital signature