Bug#267972: Debian Installer RC1 Installation report (success on DEC DIGITAL PC 5510 LP)
Package: installation-reports
Debian-installer-version: http://http.us.debian.org/debian/dists/testing/main/installer-i386/rc1/images/floppy/
uname -a: Linux debu 2.4.26-1-686 #1 Thu Jul 22 13:00:49 JST 2004 i686 GNU/Linux
Date: 2004-08-24
Method: Booted from floppy and installed via network. Packages are taken from ftp://ring.toyama-ix.net/pub/linux/debian/debian/
Machine: DEC DIGITAL PC 5510 LP . (BIOS revision is 1.11. )
Processor: Intel Pentium II 300MHz
Memory: 155220k/163840k available (1220k kernel code, 8232k reserved, 459k data, 112k init, 0k highmem)
Root Device: IDE hda: IC35L120AVV207-0, ATA DISK drive
Root Size/partition table:
Disk /dev/hda: 123.5 GB, 123522416640 bytes
255 heads, 63 sectors/track, 15017 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 62 497983+ 83 Linux
/dev/hda2 63 2738 21494970 5 Extended
/dev/hda5 63 609 4393746 83 Linux
/dev/hda6 610 731 979933+ 83 Linux
/dev/hda7 732 2676 15623181 83 Linux
/dev/hda8 2677 2738 497983+ 82 Linux swap
Output of lspci and lspci -n:
# lspci
0000:00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 03)
0000:00:03.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 30)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:09.0 VGA compatible controller: Matrox Graphics, Inc. MGA 1064SG [Mystique] (rev 03)
0000:00:11.0 Multimedia audio controller: Avance Logic Inc. ALS4000 Audio Chipset
# lspci -n
0000:00:00.0 0600: 8086:7180 (rev 03)
0000:00:01.0 0604: 8086:7181 (rev 03)
0000:00:03.0 0200: 1011:0019 (rev 30)
0000:00:07.0 0601: 8086:7110 (rev 02)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 02)
0000:00:09.0 0300: 102b:051a (rev 03)
0000:00:11.0 0401: 4005:4000
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
It was a bit amazing that after the installation, no ssh nor sshd nor ftp client are installed.
After I updated the package list with dselect, they are listed in installation candiates
and successfully installed. But this behaviour was a rather confusing.
Anyway, thanks a lot for this nice distribution. (^_^)
Reply to: