Bug#267936: INSTALL REPORT (sarge)
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 24 August 2004, York University
uname -a: Linux touch 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT 2004 i686
GNU/Linux
Date: noon 24 August 2004
Method: How did you install? net install
What did you boot off? sarge-i386-netinst.iso on a CD.
If network install, from where? deb http://debian.yorku.ca/debian/ testing
main
Proxied? no.
Machine: "Touch" desktop
Processor: Intel Pentium II (Deschutes)
Memory: 382588 kB
Root Device: IDE Western Digital 60 gB
Root Size/partition table: / 3.9 gB on hb1, swap 0.5 gB on hb5, /home 50gB on
hdb3.
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:0a.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet
(rev 12)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV10DDR [GeForce
256 DDR] (rev 10)
0000:00:00.0 0600: 8086:7190 (rev 03)
0000:00:01.0 0604: 8086:7191 (rev 03)
0000:00:07.0 0601: 8086:7110 (rev 02)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 02)
0000:00:0a.0 0200: 1186:1002 (rev 12)
0000:01:00.0 0300: 10de:0101 (rev 10)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E] (no sound)
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Wonderfull at 3 mb/s!
First install with an onboard (Asus P2B-VM) old ESS Solo11938 chip. Bad sound.
Second install with a Creative Labs ISA SB16. No sound.
Third install with a Creative Labs ISAPNP AWE64. No sound.
I've exhausted variations from alsa.opensrc.org/index.php?page=Quick+Install
and www.alsa-project.org/alsa-doc/.
modprobe snd-sbawe
FATAL: Error inserting snd_sbawe
(/lib/modules/2.6.7-1-386/kernel/sound/isa/sb/snd-sbawe.ko): No such device
(Note that this sound is good with a Knoppix boot).
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: