Bug#267429: installation-report
Package: installation-reports
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20040821/sarge-i386-netinst.iso
(md5sum is 3c9d0169c92e3fbd570dd3bee97ab0dc which is ok)
uname -a: Linux debian 2.4.26-1-386 #1 Thu Jul 22 12:46:23 JST 2004 i686 GNU/Linux
Date: Sun Aug 22 17:46:11 EEST 2004
Method: From USB CD-ROM ('USB CD' boot option in BIOS),
Network installation from ftp.fi.debian.org (no proxy)
Machine: Generic PC
Processor: Intel P4 Xeon 3Ghz (HT enabled)
Memory: 1 GB
Root Device: /dev/md0 (RAID1 on /dev/hda1 and /dev/hdc1)
Root Size/partition table:
debian:~# fdisk -l /dev/hda
Disk /dev/hda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 4741 38082051 fd Linux raid autodetect
/dev/hda2 4742 4865 996030 82 Linux swap
debian:~# fdisk -l /dev/hdc
Disk /dev/hdc: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdc1 1 4741 38082051 fd Linux raid autodetect
/dev/hdc2 4742 4865 996030 82 Linux swap
Output of lspci and lspci -n:
debian:~# lspci
0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
0000:01:09.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:01:0a.0 Ethernet controller: Intel Corp. 82541EI Gigabit Ethernet Controller (Copper)
0000:01:0b.0 Ethernet controller: Intel Corp. 82541EI Gigabit Ethernet Controller (Copper)
debian:~# lspci -n
0000:00:00.0 0600: 8086:2578 (rev 02)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
0000:00:1d.3 0c03: 8086:24de (rev 02)
0000:00:1d.7 0c03: 8086:24dd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.1 0101: 8086:24db (rev 02)
0000:00:1f.3 0c05: 8086:24d3 (rev 02)
0000:01:09.0 0300: 1002:4752 (rev 27)
0000:01:0a.0 0200: 8086:1013
0000:01:0b.0 0200: 8086:1013
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
System works ok after installation.
With RC1 I had the watchdog-reboot-loop problem that was
described in errata. I didn't test if the problem was
still in this release, I just directely booted to recovery
and moved away the following files:
/etc/rcS.d/S40hotplug
/etc/init.d/hotplug
Reboot-problem hasn't occured anymore.
The installer gave a warning that boot with root on md-device
won't work, even tough it worked fine. This is related to bug
#259238 which is resolved. Could the warning be removed?
Suggestion: Lots of options in 'tasksel' that were present in
woody are now missing. I was looking for something like
'C++ developement enviroment'.
--
Jukka Merinen -- jmerinen@iki.fi -- http://www.iki.fi/jmerinen/
Reply to: