Bug#267031: Installation report
Package: installation-reports
Debian-installer-version: rc1, 20/08/2004, got from www.nl.debian.org/devel
uname -a: Linux growl 2.6.8custom200804 #1 Thu Aug 19 11:18:19 CEST 2004
i686 GNU/Linux
Date: Thu Aug 19 07:30:15 CEST 2004
Method: Net-installed from ftp.it.debian, boot from idecd, no proxy
Machine: Assembled PC
Processor:Athlon 1Gh
Memory:512 Mb
Root Device: ide (via chipset) /dev/hdc
Root Size/partition table:
Command (m for help): p
Disk /dev/hdc: 80.0 GB, 80060424192 bytes
255 heads, 63 sectors/track, 9733 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdc1 * 1 9605 77152131 5 Extended
/dev/hdc2 9606 9733 1028160 82 Linux swap
/dev/hdc5 1 641 5148769+ 83 Linux
/dev/hdc6 642 1293 5237158+ 83 Linux
/dev/hdc7 1294 9605 66766108+ 83 Linux
hdc5 is /
hdc6 is /home
hdc7 is /data
Output of lspci and lspci -n:
***********lspci*******************
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
(rev03)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133
AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
South]
(rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C
PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1
Controller (rev 16)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1
Controller (rev 16)
0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 40)
0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
(rev 10)
0000:00:0c.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
0000:00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
0000:00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2
MX/MX400] (rev a1)
**********lscpi -n*****************
0000:00:00.0 0600: 1106:0305 (rev 03)
0000:00:01.0 0604: 1106:8305
0000:00:07.0 0601: 1106:0686 (rev 40)
0000:00:07.1 0101: 1106:0571 (rev 06)
0000:00:07.2 0c03: 1106:3038 (rev 16)
0000:00:07.3 0c03: 1106:3038 (rev 16)
0000:00:07.4 0680: 1106:3057 (rev 40)
0000:00:09.0 0200: 10ec:8139 (rev 10)
0000:00:0c.0 0401: 1274:5880 (rev 02)
0000:00:0d.0 0400: 109e:036e (rev 11)
0000:00:0d.1 0480: 109e:0878 (rev 11)
0000:01:00.0 0300: 10de:0110 (rev a1)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [ ]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
All is good and fine,only some lesser annotations:
* installer doesn't set up any fat or NTFS partitions (it didn't affect
me but someone could be worried)
* HW detection worked just fine but doesn't extend to video card. This
could
be a major issue for newbies. Also there is no way to test X configuration
during install
Very good work
Reply to: