cdrom-detect Failure
Hi,
I try to install debian by sarge install iso (rc1), kernel 2.6.7,but
always install continue normal after cdrom-detector fail twice, The
following modules load failue:
parport_pc, 8139too, ide-mod. ide-probe-mod. ide-detect, ide-floppy,
My hardward info :
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8605 [ProSavage
PM133] (rev 01)
Flags: bus master, medium devsel, latency 0
Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8605 [PM133 AGP]
(prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: ec000000-edffffff
Prefetchable memory behind bridge: e0000000-e7ffffff
Capabilities: [80] Power Management version 2
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
South] (rev 40)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
0000:00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Flags: bus master, medium devsel, latency 32
I/O ports at d000 [size=16]
Capabilities: [c0] Power Management version 2
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 1a) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 3
I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 1a) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 3
I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
ACPI] (rev 40)
Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
Flags: medium devsel, IRQ 9
Capabilities: [68] Power Management version 2
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc.
VT82C686 AC97 Audio Controller (rev 50)
Subsystem: WOLF Technology Inc: Unknown device 4c03
Flags: medium devsel, IRQ 7
I/O ports at dc00 [size=256]
I/O ports at e000 [size=4]
I/O ports at e400 [size=4]
Capabilities: [c0] Power Management version 2
0000:00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at e800 [size=256]
Memory at ef006000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
0000:00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at ec00 [size=256]
Memory at ef004000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
0000:00:0f.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Flags: bus master, medium devsel, latency 32, IRQ 7
Memory at ef005000 (32-bit, non-prefetchable) [size=2K]
Memory at ef000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
0000:01:00.0 VGA compatible controller: S3 Inc. ProSavage PM133 (rev 02)
(prog-if 00 [VGA])
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 11
Memory at ed000000 (32-bit, non-prefetchable) [size=512K]
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [dc] Power Management version 2
Capabilities: [80] AGP version 2.0
Reply to: