On Tue, Aug 17, 2004 at 09:49:03AM +0300, Tapani Tiensuu wrote: > Output of lspci: > 0000:00:06.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev > 02) > 0000:00:07.0 Non-VGA unclassified device: Intel Corp. 82378ZB/IB, 82379AB > (SIO, SIO.A) PCI to ISA Bridge (rev 43) > 0000:00:0b.0 Ethernet controller: Digital Equipment Corporation DECchip > 21040 [Tulip] (rev 24) > 0000:00:0c.0 Ethernet controller: Digital Equipment Corporation DECchip > 21142/43 (rev 30) > 0000:00:0d.0 VGA compatible controller: Texas Instruments TVP4020 [Permedia > 2] (rev 01) Please also provide the output of lspci -n, which is needed to fix which module is being loaded for this device > Comments/Problems: > For this hardware sym53c8xx module does not work. Instead one must use > ncr53c8xx. > Reboot after install failed because initrd loads only sym53c8xx. Easy to > fix from shell > before first reboot, but you might consider modifying initrd to load both. > Snippet from my dmesg: > ... > SCSI subsystem driver Revision: 1.00 > sym53c8xx: at PCI bus 0, device 6, function 0 > sym53c8xx: not initializing, device not supported > SCSI subsystem driver Revision: 1.00 > ncr53c8xx: at PCI bus 0, device 6, function 0 > ncr53c8xx: 53c810 detected > ncr53c810-0: rev 0x2 on pci bus 0 device 6 function 0 irq 11 > ... Thanks, -- Steve Langasek postmodern programmer
Attachment:
signature.asc
Description: Digital signature