Bug#265908: debian installer - installation report
Package: installation-reports
Debian-installer-version:Aug 13 20:06 sarge-i386-netinst.iso release candidate 1
uname -a:
Linux devel 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT 2004 i686 GNU/Linux
Date:13 Aug 2004
Method: boot with cdrom netinstall
Machine: laptop toshiba sa30
Processor: i386
Memory: 512 MB
Root Device: IDE
Root Size/partition table:
Disk /dev/hda: 40.0 GB, 40007761920 bytes
16 heads, 63 sectors/track, 77520 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 10169 5124703+ 7 HPFS/NTFS
/dev/hda2 10169 77520 33945314 f W95 Ext'd (LBA)
/dev/hda5 10169 20321 5116671 b W95 FAT32
/dev/hda6 20322 30479 5119600+ 83 Linux
/dev/hda7 30480 31519 524128+ 82 Linux swap
/dev/hda8 31520 35582 2047720+ 83 Linux
/dev/hda9 35583 45740 5119600+ 83 Linux
/dev/hda10 45741 55428 4882720+ 83 Linux
/dev/hda11 55429 65116 4882720+ 83 Linux
/dev/hda12 65117 77520 6251584+ 83 Linux
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda6 / ext3 defaults,errors=remount-ro 0 1
/dev/hda8 /home ext3 defaults 0 2
/dev/hda7 none swap sw 0 0
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
Output of lspci:
devel:/home/zz# lspci
0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02)
0000:00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control Registers (rev 02)
0000:00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration Process Registers (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
0000:00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
0000:02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
0000:02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:02:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
devel:/home/zz#
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [ ]
Config network: [0]
Detect CD: [O]
Load installer modules: [ ]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
1) impossible to select belgian keyboard ( got a red screen with ... I am forgotten)
So, after the installation I did a dpkg-reconfigure console-data and select /azerty/belgian/standard
2) before selecting the packages I went to vc2 and configured/started my adsl with pppoeconf & pon
a newbie will maybe not know what to do here.
We should get a message with something like:
"before selecting packages with dselect,aptitude,....you will have to activate your internet connection"
Thanks a lot to the Debian Team.
Best regards from Belgium,
carex
Reply to: