Bug#265363: installation report - ECS G550 notebook
Package: installation-reports
INSTALL REPORT
Debian-installer-version: Sarge netinst snaphost jul/221 from
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/
uname -a: Linux orni 2.6.7 #1 Tue Aug 10 12:27:58 BRT 2004 i686 GNU/Linux
Date: jul/22
Method: booted from netinst cd, network install using brazilian mirror ftp.br.debian.org
Machine: ECS G50 Notebook
Processor: Celeron 1.6
Memory: 512 MB
Root Device: Seagate 40Gb - ST94011A, ATA DISK drive
hda: max request size: 1024KiB
hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
EXT3 FS on hda5, internal journal
Root Size/partition table:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda5 32G 29G 1.6G 95% /
tmpfs 245M 0 245M 0% /dev/shm
Output of lspci and lspci -n:
# lspci
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 651 Host (rev 02)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 14)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
0000:00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
0000:00:0a.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter
# lspci -n
0000:00:00.0 0600: 1039:0651 (rev 02)
0000:00:01.0 0604: 1039:0001
0000:00:02.0 0601: 1039:0962 (rev 14)
0000:00:02.1 0c05: 1039:0016
0000:00:02.3 0c00: 1039:7007
0000:00:02.5 0101: 1039:5513
0000:00:02.6 0703: 1039:7013 (rev a0)
0000:00:02.7 0401: 1039:7012 (rev a0)
0000:00:03.0 0c03: 1039:7001 (rev 0f)
0000:00:03.1 0c03: 1039:7001 (rev 0f)
0000:00:03.2 0c03: 1039:7001 (rev 0f)
0000:00:03.3 0c03: 1039:7002
0000:00:04.0 0200: 1039:0900 (rev 91)
0000:00:0a.0 0607: 1524:1410
0000:01:00.0 0300: 1039:6325
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
CardBus Card not correctly detected when inserted!
cardctl shows there is a card
# cardctl status
Socket 0:
3.3V CardBus card
function 0: [ready]
then lspci shows exactly the same output as above (without the card inserted)
and cardmgr doesn't detect the card !
ii pcmcia-cs 3.2.5-8 PCMCIA Card Services for Linux
I don't know if this is a kernel issue, so i'm posting here anyway.
Except for the xfree config file, that i've used the one generated by knoppix
to avoid manually configuring, everything else worked perfectly.
Reply to: