Bug#265330: Install on UltraSparc 5
Package: installation-reports
Debian-installer-version: Debian Installer RC1
Date: 08/11/04
Method: Install with a Business card CD.
Boot from CD, partitioning manually, install by FTP/HTTP from
ftp.fr.debian.org without proxy.
Machine: Sun Ultra 5
Processor:
cpu : TI UltraSparc IIi (Sabre)
fpu : UltraSparc IIi integrated FPU
promlib : Version 3 Revision 25
prom : 3.25.2
type : sun4u
ncpus probed : 1
ncpus active : 1
Cpu0Bogo : 716.80
Cpu0ClkTck : 0000000015752a00
MMU Type : Spitfire
Memory:
total used free shared buffers
cached
Mem: 255552 36816 218736 0 3736
15312
-/+ buffers/cache: 17768 237784
Swap: 499944 0 499944
Root Device:
hda: ST38410A, ATA DISK drive
hda: max request size: 128KiB
hda: 16841664 sectors (8622 MB) w/512KiB Cache, CHS=16708/16/63, (U)DMA
hda: hda1 hda2 hda3 hda4 hda5 hda6
Root Size/partition table:
Disk /dev/hda (Sun disk label): 16 heads, 63 sectors, 16708 cylinders
Units = cylinders of 1008 * 512 bytes
Device Flag Start End Blocks Id System
/dev/hda1 0 388 195552 83 Linux native
/dev/hda2 388 1380 499968 82 Linux swap
/dev/hda3 0 16708 8420832 5 Whole disk
/dev/hda4 1380 5255 1953000 83 Linux native
/dev/hda5 5255 10099 2441376 83 Linux native
/dev/hda6 10099 16708 3330936 83 Linux native
/dev/hda1 179M 35M 136M 21% /
/dev/hda6 3.2G 33M 3.0G 2% /home
/dev/hda5 2.3G 498M 1.7G 23% /usr
/dev/hda4 1.8G 72M 1.6G 5% /var
Output of lspci:
0000:00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIi
0000:00:01.0 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced
PCI Bridge (rev 13)
0000:00:01.1 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced
PCI Bridge (rev 13)
0000:01:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
0000:01:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy
Meal (rev 01)
0000:01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro
215GP (rev 5c)
0000:01:03.0 IDE interface: Silicon Image, Inc. (formerly CMD Technology
Inc) PCI0646 (rev 03)
0000:02:02.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX
[Boomerang]
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
You rock.
--
Julien Danjou
.''`. Debian developer
: :' : http://julien.danjou.info
`. `' http://people.debian.org/~acid
`- 9A0D 5FD9 EB42 22F6 8974 C95C A462 B51E C2FE E5CD
Reply to: