Bug#265186: Installation Report for Sarge Installer RC1
Package: installation-reports
Debian-installer-version: Sarge Installer RC1
uname -a: Linux jabberwock 2.4.26-1-k7 #1 Thu Jul 22 13:24:02 JST 2004
i686 GNU/Linux
Date: Wednesday August 11th 2004
Method: I used the Sarge RC1 businesscard install from
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc1/sarge-i386-businesscard.iso
. Booted off the CD, I used gulus.usherbrooke.ca to download the packages
Machine: Custom, ASUS A7V 133 motherboard
Processor:AMD Athlon (Thunderbird) 1.4ghz
Memory:768mb PC 133 SDRAM
Root Device: 1 40gb 7200rpm Maxtor IDE hard drive. /dev/hda
Root Size/partition table:
Filesystem Size Used Avail Use% Mounted on
/dev/hda1 6.6G 1.4G 5.2G 21% /
tmpfs 316M 0 316M 0% /dev/shm
/dev/hda5 32G 4.4G 27G 14% /home
/dev/md0 188G 120G 68G 64% /mnt/storage
Output of lspci:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365
[KT133/KM133] (rev 03)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133
AGP]
0000:00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
South] (rev 40)
0000:00:04.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:04.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 16)
0000:00:04.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 16)
0000:00:04.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 40)
0000:00:09.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
0000:00:09.1 Input device controller: Creative Labs SB Audigy MIDI/Game
port (rev 04)
0000:00:09.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
(rev 04)
0000:00:0d.0 Ethernet controller: Accton Technology Corporation
SMC2-1211TX (rev 10)
0000:00:11.0 Unknown mass storage controller: Promise Technology, Inc.
PDC20265 (FastTrak100 Lite/Ultra100) (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R300
NE [Radeon 9500 Pro]
0000:01:00.1 Display controller: ATI Technologies Inc Radeon R300
[Radeon 9500 Pro] (Secondary)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
No problems whatsoever, great job with the installer!
--
Ryan Vilim
http://jabberwock.ca
Reply to: