Bug#264925: Installation good with 3ware 7006-2, bad with Promise TX2000
Package: installation-reports
INSTALL REPORT
Debian-installer-version: RC1 2004-08-10 from mirror.direct.ca
uname -a: Linux orion 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT 2004 i686 GNU/Linux
Date: 2004-08-10
Method: netinst CD than dhcp and grabbed from mirror.direct.ca
Machine: Clone
Processor: P3 866
Memory: 512
Root Device: 3ware Escalade 7006-2 w/ 2 * Seagate 7200.7 80 GB HDD
Root Size/partition table:
sda1 / BOOT Primary Linux ReiserFS 1003.49
sda2 SWAP Primary Linux swap 1003.49
sda5 /tmp Logical Linux ReiserFS 1003.49
sda6 /var Logical Linux ReiserFS 3997.49
sda7 /usr Logical Linux ReiserFS 3997.49
sda8 /root Logical Linux ReiserFS 1003.49
sda9 /home Logical Linux ReiserFS 10001.95
sda10 /var/www Logical Linux ReiserFS 39999.54
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 05)
0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 05)
0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 05)
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 05)
0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 05)
0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 05)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
0000:02:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:02:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
0000:02:0c.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 01)
0000:00:00.0 0600: 8086:1130 (rev 02)
0000:00:01.0 0604: 8086:1131 (rev 02)
0000:00:1e.0 0604: 8086:244e (rev 05)
0000:00:1f.0 0601: 8086:2440 (rev 05)
0000:00:1f.1 0101: 8086:244b (rev 05)
0000:00:1f.2 0c03: 8086:2442 (rev 05)
0000:00:1f.3 0c05: 8086:2443 (rev 05)
0000:00:1f.4 0c03: 8086:2444 (rev 05)
0000:01:00.0 0300: 1002:5159
0000:02:0a.0 0200: 10ec:8139 (rev 10)
0000:02:0b.0 0200: 10b7:9200 (rev 78)
0000:02:0c.0 0104: 13c1:1001 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I tried this with a Promise TX2000 Controller and had one hell of a time.
The standard IDE was detected but no show for the /dev/ideraid/d0 that
I got under the old boot floppies (bf2.4, which don't detect the array on
the TX2000 anyways, a 2.4.27 with the bf2.4 kernel config does detect though)
Popped in the 3ware 7006-2 (should have started with that, but live and learn)
and everything worked like a charm. I have also built a P3 450 off the RC1
discs with no issues. No strange hardware or configs for that one.
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: