Package: installation-reports
INSTALL REPORT
Debian-installer-version: http://debian-amd64.alioth.debian.org/debian-installer/2004-07-31/monolithic/2.6/mini.iso
uname -a: Linux daedalus 2.6.7-5-amd64-xeon #1 SMP Thu Jul 15 00:27:37 CEST 2004 x86_64 GNU/Linux
Date: Sat Jul 31 10:51
Method: Booted from CD, performed a network install using,
"deb http://debian-amd64.alioth.debian.org/pure64 unstable main", without
a proxy.
Machine: Homebuilt, MSI K8T Neo Mobo, RTL8169 ethernet, via82cxxx sound
Processor: Athlon64 2800
Memory: 512MB
Root Device: Maxtor 6Y200P0, ATA DISK drive, (/dev/hda)
Root Size/partition table:
Device Boot Start End Blocks Id System Mount
/dev/hda1 * 1 15 120456 83 Linux /boot
/dev/hda2 16 1231 9767520 83 Linux /
/dev/hda3 1232 1353 979965 82 Linux swap
/dev/hda4 1354 24792 188273767+ f W95 Ext'd (LBA)
/dev/hda5 1354 2569 9767488+ 83 Linux /i386
/dev/hda6 2570 24792 178506216 83 Linux /home
Output of lspci and lspci -n:
--------------------------------------------------------------------------
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South]
0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
0000:00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: nVidia Corporation NV 36 [GeForce 5700] (rev a1)
--------------------------------------------------------------------------
0000:00:00.0 0600: 1106:3188 (rev 01)
0000:00:01.0 0604: 1106:b188
0000:00:0b.0 0200: 10ec:8169 (rev 10)
0000:00:0f.0 0101: 1106:0571 (rev 06)
0000:00:10.0 0c03: 1106:3038 (rev 81)
0000:00:10.1 0c03: 1106:3038 (rev 81)
0000:00:10.2 0c03: 1106:3038 (rev 81)
0000:00:10.3 0c03: 1106:3038 (rev 81)
0000:00:10.4 0c03: 1106:3104 (rev 86)
0000:00:11.0 0601: 1106:3227
0000:00:11.5 0401: 1106:3059 (rev 60)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:00.0 0300: 10de:0342 (rev a1)
--------------------------------------------------------------------------
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I booted off the CD, and selected a normal install, (hitting enter at the
prompt). All of my hardware was detected properly. I chose to manually
partition which worked as expected. I answered yes to installing GRUB,
which also worked as expected.
Good work, and thanks!!
--
Eric Evans
eevans@sym-link.com
Attachment:
signature.asc
Description: Digital signature