Bug#263207: hppa-net

[brlink@debian.org]

Package: installation-reports

Debian-installer-version: http://people.debian.org/~jbailey/d-i/hppa/2004-07-29/boot.img
uname -a: Linux nn125 2.4.26-32-smp #1 SMP Sun Jun 20 20:45:33 CEST 2004 parisc GNU/Linux
Date: 3.8.2004 11:00 (+2)
Method: netboot

Machine: hppa
Processor: PA-RISC 1.1e PA7300LC (PCX-L2) 9000/778/B180L Merlin L2+ 180 (9000/778/B180L)
Memory: 128 MB
Root Device: /dev/sda
Root Size/partition table: 
Disk /dev/sda: 4294 MB, 4294816768 bytes
133 heads, 62 sectors/track, 1017 cylinders
Units = cylinders of 8246 * 512 = 4221952 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1           8       32953   f0  Linux/PA-RISC boot
/dev/sda2               9          39      127813   83  Linux (/boot)
/dev/sda3              40        1017     4032294    5  Extended
/dev/sda5   *          40         971     3842605   83  Linux (/)
/dev/sda6             972        1017      189627   82  Linux swap
Output of lspci:
0000:00:13.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04)
0000:00:14.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 30)

Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [ ]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [E?]
Install boot loader:    [O]
Reboot:                 [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

When doing the baseinstall it said it could not install libuuid1,
when selecting to install the base system again, it worked.
(problem with mirror?)

No pciutils were installed by default.