Bug#236423: reassigning to hotplug
reassign 236423 hotplug
tags 236423 - help
thanks
Hi,
I've done some more investigation, and added a placemarker echo line to the
end of /etc/init.d/discover, and the ich2rom modprobe attempt occurs well
and truly after /etc/init.d/discover has finished, so the problem is no
longer discover.
It seems to be hotplug that is causing it, but I can't see directly the
cause.
If I'm reading the modules.dep file correctly, ich2rom depends on some MTD
related modules, but nothing depends on ich2rom, so it's not getting loaded
by way of a dependency.
If I add ich2rom to /etc/hotplug/blacklist, the problem goes away.
I've attached a transcript of two boots, one without ich2rom in
/etc/hotplug/blacklist and one with it in, and you can see the difference.
If I can be of any further assistance, please let me know.
regards
Andrew
Linux version 2.6.7-1-686 (dilinger@toaster.hq.voxel.net) (gcc version 3.3.4 (Debian 1:3.3.4-2)) #1 Thu Jul 8 05:36:53 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffbc0100 - 00000000ffbc0101 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
found SMP MP-table at 000fb6d0
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000f9e90
ACPI: RSDT (v001 AMIINT INTEL845 0x00000010 MSFT 0x00000097) @ 0x0fff0000
ACPI: FADT (v001 AMIINT INTEL845 0x00000011 MSFT 0x00000097) @ 0x0fff0030
ACPI: MADT (v001 AMIINT 0x00000009 MSFT 0x00000097) @ 0x0fff00b0
ACPI: DSDT (v001 INTEL BROKDALE 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:0 APIC version 20
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hda2 ro vga=0x318 console=ttyS0,115200 single
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1504.185 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Memory: 252160k/262080k available (1515k kernel code, 9224k reserved, 659k data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2973.69 BogoMIPS
Security Scaffold v1.0.0 initialized
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1503.0208 MHz.
..... host bus clock speed is 100.0213 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4584k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f6f30
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x5fb7, dseg 0xf0000
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
testing the IO APIC.......................
.................................... done.
PCI: Using ACPI for IRQ routing
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cr/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
initrd-tools: 0.1.70
vesafb: framebuffer at 0xd0000000, mapped to 0xd0823000, size 6144k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:0f34
vesafb: scrolling: redraw
vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0
fb0: VESA VGA frame buffer device
Console: switching to colour frame buffer device 128x48
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 18
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: ST3120026A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SONY DVD-ROM DDU1211, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
INIT: version 2.85 booting
Activating swap.
Adding 498000k swap on /dev/hda3. Priority:-1 extents:1
Checking root file system...
fsck 1.35 (28-Feb-2004)
/dev/hda2: clean, 13569/124496 files, 186455/249EXT3 FS on hda2, internal journal
007 blocks
/etc/init.d/rcS: System clock was not updated at this time.
Calculating module dependencies... done.
Loading modules...
ide-cd
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-detect
FATAL: Module ide_detect not found.
i2c-i801
i2c-isa
eeprom
w83627hf
All modules loaded.
Capability LSM initialized
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
Creating device-mapper devices...done.
Setting up LVM Volume Groups...
Reading all physical volumes. This may take a while...
Found volume group "base" using metadata type lvm2
4 logical volume(s) in volume group "base" now active
Checking all file systems...
fsck 1.35 (28-Feb-2004)
/dev/mapper/base-home: clean, 687/524288 files, 81941/1048576 blocks
/dev/mapper/base-tmp: clean, 13/524288 files, 74090/1048576 blocks
/dev/mapper/base-usr: clean, 96553/524288 files, 429944/1048576 blocks
/dev/mapper/base-var: clean, 7707/1048576 files, 801321/2097152 blocks
Setting kernel variables ...
... done.
Mounting local filesystems...
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/mapper/base-home on /home type ext3 (rw)
/dev/mapper/base-tmp on /tmp type ext3 (rw)
/dev/mapper/base-usr on /usr type ext3 (rw)
/dev/mapper/base-var on /var type ext3 (rw)
Cleaning /tmp /var/run /var/lock.
Detecting hardware: agpgart e100 es1370 usb_uhci usb-uhci
Loading agpgart module.
Linux agpgart interface v0.100 (c) Dave Jones
Loading e100 module.
e100: Intel(R) PRO/100 Network Driver, 3.0.18
e100: Copyright(c) 1999-2004 Intel Corporation
e100: eth0: e100_probe: addr 0xdfeff000, irq 17, MAC addr 00:D0:B7:17:BE:15
Loading es1370 module.
es1370: version v0.38 time 05:55:04 Jul 8 2004
es1370: found adapter at io 0xbc00 irq 16
es1370: features: joystick on, line in, mic impedance 0
FATAL: Module usb_uhci not found.
Skipping usb_uhci module; assuming it is compiled int kernel.
FATAL: Module usb_uhci not found.
Skipping usb-uhci mode; assuming it is compiled into the kernel.
/etc/init.d/discover finishes here
Setting sensors limits: done.
Running 0dns-down to make sure resolv.conf is ok...done.
Cleaning: /etc/network/ifstate.
Starting hotplug subsystem:
input
evbug: blacklisted
evdev: loaded successfully
evbug: blacklisted
evdev: already loaded
input [success]
isapnp
PNP0A03: can't be loaded
PNP0C01: can't be loaded
PNP0000: can't be loaded
PNP0200: can't be loaded
PNP0100: can't be loaded
Real Time Clock Driver v1.12
PNP0B00: loaded sucessfully
PNP0303: can't be loaded
input: PC Speaker
PNP0800: loaded sucessfully
PNP0C04: can't be loaded
PNP0501: can't be loaded
PNP0501: can't be loaded
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
PNP0401: loaded sucessfully
PNPB006: can't be loaded
PNPB02F: loaded sucessfully
inserting floppy driver for 2.6.7-1-686
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP0700: loaded sucessfully
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
PNP0F13: loaded sucessfully
isapnp [success]
net
mice: PS/2 mouse device common for all mice
net [success]
pci
ts: Compaq touchscreen protocol output
agpgart: Detected an Intel i845 Chipset.
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xe0000000
intel-agp: loaded successfully
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
pciehp: loaded successfully
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
shpchp: loaded successfully
pciehp: already loaded
shpchp: already loaded
hw_random: RNG not detected
modprobe: FATAL: Error inserting hw_random (/lib/modules/2.6.7-1-686/kernel/drivers/char/hw_random.ko): No such device
hw_random: can't be loaded
missing kernel or user mode driver hw_random
i8xx_tco: blacklisted
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(bf 57) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
modprobe: FATAL: Error inserting ich2rom (/lib/modules/2.6.7-1-686/kernel/drivers/mtd/maps/ich2rom.ko): No such device
ich2rom: can't be loaded
missing kernel or user mode driver ich2rom
piix: already loaded
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub #1)
uhci_hcd 0000:00:1f.2: irq 19, io base 0000d800
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub #2)
uhci_hcd 0000:00:1f.4: irq 23, io base 0000dc00
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci-hcd: loaded successfully
usb 1-1: new full speed USB device using address 2
usb 1-1: config 1 has an invalid descriptor of length 24, skipping remainder of the config
usb 1-2: new full speed USB device using address 3
uhci-hcd: already loaded
ignore pci display device on 01:00.0
es1370: already loaded
snd-ens1370: loaded successfully
e100: already loaded
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eepro100: loaded successfully
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18] MMIO=[dfefe800-dfefefff] Max Packet=[2048]
ohci1394: loaded successfully
pci [success]
usb
usb 1-1: string descriptor 0 too short
ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
libusbscanner: loaded successfully
libusbscanner: loaded successfully
expr: non-numeric argument
/etc/hotplug/usb/libusbscanner: line 1: printf: 1-1/1: invalid number
chown: failed to get attributes of `/proc/bus/usb/000/000': No such file or directory
chmod: failed to get attributes of `/proc/bus/usb/000/000': No such file or directory
usb [success]
done
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces...Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
eth1: unknown hardware address type 24
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
eth1: unknown hardware address type 24
NET: Registered protocol family 17
Listening on LPF/eth0/00:d0:b7:17:be:15
Sending on LPF/eth0/00:d0:b7:17:be:15
Sending on Socket/fallback/fallback-net
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPOFFER from 172.16.0.1
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 172.16.0.1
bound to 172.16.0.2 -- renewal in 129750 seconds.
done.
Starting portmap daemon: portmap.
Loading the saved-state of the serial devices...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Setting the System Clock using the Hardware Clock as reference...
System Clock set. Local time: Fri Jul 30 17:57:38 EST 2004
Initializing random number generator...done.
Recovering nvi editor sessions... done.
Setting up X server socket directory /tmp/.X11-unix...done.
Setting up ICE socket directory /tmp/.ICE-unix...done.
Give root password for maintenance
(or type Control-D for normal startup):
brutus:~# tail /etc/hotplug/blacklist
shwdt
softdog
w83627hf_wdt
w83877f_wdt
wafer5823wdt
wdt285
wdt977
wdt
wdt_pci
brutus:~# echo ich2rom >> /etc/hotplug/blacklist
brutus:~# reboot
INIT:
INIT: Sending processes the TERM signal
brutus:~#
INIT: Stopping GNOME Display Manager: gdm not running.
Stopping periodic command scheduler: cron.
ERR: /usr/sbin/couriertcpd missing
Stopping file alteration monitor: FAM.
Stopping internet superserver: inetd.
Stopping LAN Information Server: lisa.
Stopping MySQL database server: mysqld.
Stopping mail transport agent: Postfix.
Stopping PostgreSQL database server: postmasterpg_ctl: could not find /var/lib/postgres/data/postmaster.pid
Is postmaster running?
.
Stopping sensor daemon: sensord not running.
Stopping OpenBSD Secure Shell server: sshd.
Stopping Xprint servers: Xprt.
Stopping mail server: dovecot .
Saving the System Clock time to the Hardware Clock...
Hardware Clock updated to Fri Jul 30 17:58:09 EST 2004.
Stopping PowerDNS authorative nameserver: not running
Stopping deferred execution scheduler: atd.
Stopping hotplug subsystem:
input
input [success]
isapnp
isapnp [success]
net
net [success]
pci
pci [success]
usb
usb [success]
done
Stopping kernel log daemon: klogd.
Stopping system log daemon: syslogd.
Sending all processes the TERM signal...done.
Sending all processes the KILL signal...done.
Saving random seed...done.
Unmounting remote and non-toplevel virtual filesystems...done.
Stopping portmap daemon: portmap.
Deconfiguring network interfaces...done.
Deactivating swap...done.
Unmounting local filesystems...done.
Shutting down LVM Volume Groups...
Unable to unlink device node for 'base-usr'
/dev/base/usr: unlink failed: Read-only file system
Unable to unlink device node for 'base-var'
/dev/base/var: unlink failed: Read-only file system
Unable to unlink device node for 'base-home'
/dev/base/home: unlink failed: Read-only file system
Unable to unlink device node for 'base-tmp'
/dev/base/tmp: unlink failed: Read-only file system
0 logical volume(s) in volume group "base" now active
Rebooting... Restarting system.
Linux version 2.6.7-1-686 (dilinger@toaster.hq.voxel.net) (gcc version 3.3.4 (Debian 1:3.3.4-2)) #1 Thu Jul 8 05:36:53 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffbc0100 - 00000000ffbc0101 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
found SMP MP-table at 000fb6d0
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000f9e90
ACPI: RSDT (v001 AMIINT INTEL845 0x00000010 MSFT 0x00000097) @ 0x0fff0000
ACPI: FADT (v001 AMIINT INTEL845 0x00000011 MSFT 0x00000097) @ 0x0fff0030
ACPI: MADT (v001 AMIINT 0x00000009 MSFT 0x00000097) @ 0x0fff00b0
ACPI: DSDT (v001 INTEL BROKDALE 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:0 APIC version 20
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hda2 ro vga=0x318 console=ttyS0,115200 single
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1504.149 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Memory: 252160k/262080k available (1515k kernel code, 9224k reserved, 659k data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2973.69 BogoMIPS
Security Scaffold v1.0.0 initialized
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1503.0202 MHz.
..... host bus clock speed is 100.0213 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4584k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f6f30
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x5fb7, dseg 0xf0000
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
testing the IO APIC.......................
.................................... done.
PCI: Using ACPI for IRQ routing
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4584 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
initrd-tools: 0.1.70
vesafb: framebuffer at 0xd0000000, mapped to 0xd0823000, size 6144k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:0f34
vesafb: scrolling: redraw
vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0
fb0: VESA VGA frame buffer device
Console: switching to colour frame buffer device 128x48
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 18
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: ST3120026A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SONY DVD-ROM DDU1211, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
INIT: version 2.85 booting
Activating swap.
Adding 498000k swap on /dev/hda3. Priority:-1 extents:1
Checking root file system...
fsck 1.35 (28-Feb-2004)
/dev/hda2: clean, 13569/124496 files, 186455/249EXT3 FS on hda2, internal journal
007 blocks
/etc/init.d/rcS: System clock was not updated at this time.
Calculating module dependencies... done.
Loading modules...
ide-cd
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-detect
FATAL: Module ide_detect not found.
i2c-i801
i2c-isa
eeprom
w83627hf
All modules loaded.
Capability LSM initialized
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
Creating device-mapper devices...done.
Setting up LVM Volume Groups...
Reading all physical volumes. This may take a while...
Found volume group "base" using metadata type lvm2
4 logical volume(s) in volume group "base" now active
Checking all file systems...
fsck 1.35 (28-Feb-2004)
/dev/mapper/base-home: clean, 687/524288 files, 81941/1048576 blocks
/dev/mapper/base-tmp: clean, 13/524288 files, 74090/1048576 blocks
/dev/mapper/base-usr: clean, 96553/524288 files, 429944/1048576 blocks
/dev/mapper/base-var: clean, 7702/1048576 files, 801320/2097152 blocks
Setting kernel variables ...
... done.
Mounting local filesystems...
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/mapper/base-home on /home type ext3 (rw)
/dev/mapper/base-tmp on /tmp type ext3 (rw)
/dev/mapper/base-usr on /usr type ext3 (rw)
/dev/mapper/base-var on /var type ext3 (rw)
Cleaning /tmp /var/run /var/lock.
Detecting hardware: agpgart e100 es1370 usb_uhci usb-uhci
Loading agpgart module.
Linux agpgart interface v0.100 (c) Dave Jones
Loading e100 module.
e100: Intel(R) PRO/100 Network Driver, 3.0.18
e100: Copyright(c) 1999-2004 Intel Corporation
e100: eth0: e100_probe: addr 0xdfeff000, irq 17, MAC addr 00:D0:B7:17:BE:15
Loading es1370 module.
es1370: version v0.38 time 05:55:04 Jul 8 2004
es1370: found adapter at io 0xbc00 irq 16
es1370: features: joystick on, line in, mic impedance 0
FATAL: Module usb_uhci not found.
Skipping usb_uhci module; assuming it is compiled into the kernel.
FATAL: Module usb_uhci not found.
Skipping usb-uhci module; assuming it is compiled into the kernel.
/etc/init.d/discover finishes here
Setting sensors limits: done.
Running 0dns-down to make sure resolv.conf is ok...done.
Cleaning: /etc/network/ifstate.
Starting hotplug subsystem:
input
evbug: blacklisted
evdev: loaded successfully
evbug: blacklisted
evdev: already loaded
input [success]
isapnp
PNP0A03: can't be loaded
PNP0C01: can't be loaded
PNP0000: can't be loaded
PNP0200: can't be loaded
PNP0100: can't be loaded
Real Time Clock Driver v1.12
PNP0B00: loaded sucessfully
PNP0303: can't be loaded
PNP0800: loaded sucessfully
PNP0C04: can't be loaded
PNP0501: can't be loaded
PNP0501: can't be loaded
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
PNP0401: loaded sucessfully
PNPB006: can't be loaded
PNPB02F: loaded sucessfully
inserting floppy driver for 2.6.7-1-686
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP0700: loaded sucessfully
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
PNP0F13: loaded sucessfully
isapnp [success]
net
mice: PS/2 mouse device common for all mice
net [success]
pci
ts: Compaq touchscreen protocol output
agpgart: Detected an Intel i845 Chipset.
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xe0000000
intel-agp: loaded successfully
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
pciehp: loaded successfully
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
shpchp: loaded successfully
pciehp: already loaded
shpchp: already loaded
hw_random: RNG not detected
modprobe: FATAL: Error inserting hw_random (/lib/modules/2.6.7-1-686/kernel/drivers/char/hw_random.ko): No such device
hw_random: can't be loaded
missing kernel or user mode driver hw_random
i8xx_tco: blacklisted
ich2rom: blacklisted
piix: already loaded
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub #1)
uhci_hcd 0000:00:1f.2: irq 19, io base 0000d800
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub #2)
uhci_hcd 0000:00:1f.4: irq 23, io base 0000dc00
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci-hcd: loaded successfully
usb 1-1: new full speed USB device using address 2
usb 1-1: config 1 has an invalid descriptor of length 24, skipping remainder of the config
usb 1-2: new full speed USB device using address 3
uhci-hcd: already loaded
ignore pci display device on 01:00.0
es1370: already loaded
snd-ens1370: loaded successfully
e100: already loaded
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eepro100: loaded successfully
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18] MMIO=[dfefe800-dfefefff] Max Packet=[2048]
ohci1394: loaded successfully
pci [success]
usb
usb 1-1: string descriptor 0 too short
ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
libusbscanner: loaded successfully
libusbscanner: loaded successfully
expr: non-numeric argument
/etc/hotplug/usb/libusbscanner: line 1: printf: 1-1/1: invalid number
chown: failed to get attributes of `/proc/bus/usb/000/000': No such file or directory
chmod: failed to get attributes of `/proc/bus/usb/000/000': No such file or directory
usb [success]
done
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces...Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
eth1: unknown hardware address type 24
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
eth1: unknown hardware address type 24
NET: Registered protocol family 17
Listening on LPF/eth0/00:d0:b7:17:be:15
Sending on LPF/eth0/00:d0:b7:17:be:15
Sending on Socket/fallback/fallback-net
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
DHCPOFFER from 172.16.0.1
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 172.16.0.1
bound to 172.16.0.2 -- renewal in 129750 seconds.
done.
Starting portmap daemon: portmap.
Loading the saved-state of the serial devices...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Setting the System Clock using the Hardware Clock as reference...
Initializing random number generator...done.
Recovering nvi editor sessions... done.
Setting up X server socket directory /tmp/.X11-unix...done.
Setting up ICE socket directory /tmp/.ICE-unix...done.
Give root password for maintenance
(or type Control-D for normal startup):
brutus:~#
Reply to: