Bug#261722: installation-reports
Package: installation-reports
Debian-installer-version: <25/7/2004 Debian official website
installer v4>
uame a: <Linux debian 2.6.3-1-386 #2 Tue Feb 24 20:20:23 EST
2004 i686 GNU/Linux>
Date: <25/7/2004>
Method: <network debian httpe debian Frnce no proxi>
Machine: <self assembled>
Processor:AMD Athlon 2500+
Memory:512 mo
Root Device: <IDE dev/hdb1 maxtor 20 go>
Root Size/partition table: <
/dev/hda5 /windows vfat
/dev/hdb5 none 1 go swap
/dev/hdb1 / 5.2 GO ext3
/dev/hdb3 /usr/local 2.1 go ext3
/dev/hdb4 /hdb ext3
/dev/hdd1 /hdd ext3
/dev/hdc /media/cdrom iso9660
/dev/fd0 /media/floppy (i got no floppy disk...)
/dev/hdc /cdrom iso9660
/dev/sdb1 /cfcard vfat user,noauto, 0
>
Output of lspci:
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS]
746 Host (rev 10)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS]
SG86C202
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS]
SiS963 [MuTIOL Media I
O] (rev 25)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown
device 0016
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS]
5513 [IDE]
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS]
USB 1.0 Controller
(rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS]
USB 1.0 Controller
(rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS]
USB 2.0 Controller
0000:00:04.0 Ethernet controller: Silicon Integrated Systems
[SiS] SiS900 PCI Fa
st Ethernet (rev 90)
0000:00:0c.0 Multimedia video controller: Brooktree
Corporation Bt848 Video Capt
ure (rev 12)
0000:00:0d.0 Multimedia audio controller: Yamaha Corporation
YMF-744B [DS-1S Aud
io Controller] (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc
Radeon R350 [Radeon
9800 Pro]
0000:01:00.1 Display controller: ATI Technologies Inc Radeon
R350 [Radeon 9800 P
ro] (Secondary)
Base System Installation Checklist:
Initial boot worked: [o]
Configure network HW: [o]
Config network: [o]
Detect CD: [o]
Load installer modules: [o]
Detect hard drives: [o]
Partition hard drives: [o]
Create file systems: [o]
Mount partitions: [o]
Install base system: [o]
Install boot loader: [o](but did'nt detect windows)
Reboot: [o]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't
try it
Comments/Problems:
<Perfect installation everything was fine except for the x
installation.
As i know my card(Ati radeon 9800 pro) is not supported i
chose the vesa driver.
The trouble was that the detection tried to place it on a
wrong pci slot (0:1:0:0) I had to correct it to 1:0:0:0 so
that x works
Best regards and continue the good work !>
Reply to: